(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Screwdrivers（Page12）
| Days to Ship |
|
|---|
-
SIGNET
[Features]
· Easy to grip ergonomic handle reduces fatigue.
· With base hexagon, a wrench can be applied for rotation.
· A through type with a grip end that has a striking area, which is ideal for removing fixed screws.- Volume Discount
Standard Price: MYR 66.00- Days to Ship: 4 Day(s) or more -
Interchangeable Stubby Screwdriver
SIGNET
[Features]
· Ideal for extremely narrow locations where even a normal stubby screwdriver cannot be used.
· Blister packed.Standard Price: MYR 43.26 Days to Ship: 13 Day(s) or more -
BESTTOOL
Change in 3 directions, 180°, 45°, and 90°, is possible. High torque. Adopts 48-tooth ratchet gears.
Standard Price: MYR 121.16 Days to Ship: 10 Day(s) or more -
Mobile Phone Screwdriver HPD-04
BESTTOOL
It supports special screws for mobile phones, precision instruments for communication, etc.
Standard Price: MYR 45.44 Days to Ship: 10 Day(s) or more -
Standard Price: MYR 41.18 Days to Ship: 10 Day(s) or more -
Standard Price: MYR 36.05 Days to Ship: 8 Day(s) or more -
LED Electrical Screwdriver D-745
HOZAN
An LED type inspection screwdriver with high visibility.
[Features]
· Batteries can be changed.
· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.
· Handle diameter 16 mm, weight 23 g.
· Be sure to check the light before use.
· Be careful of short circuit and electric shock.
[Applications]
· Used for determining AC polarity and checking electrical conductance.
· Can be used within the applicable range.- Volume Discount
Standard Price: MYR 42.66 Days to Ship: 5 Day(s) or more -
Screwdriver Set for Voltage Detection Replacement Set of 6 (for Low Voltage)
VESSEL
For voltage testing and maintenance of electrical products and distribution boards in general households or industry.
Standard Price: MYR 74.89 Days to Ship: 8 Day(s) -
TRUSCO NAKAYAMA
[Features]
· Ideal for attaching and detaching fine screws for eyeglasses.Standard Price: MYR 35.99 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· The ratchet mechanism enables fast turning in tight spaces.Standard Price: MYR 35.99 Days to Ship: 8 Day(s) -
TRUSCO NAKAYAMA
[Features]
· The ratchet mechanism enables fast turning in tight spaces.
· Ultra-short design that allows the turning of hexagon bolts in narrow locations.Standard Price: MYR 97.60 Days to Ship: 8 Day(s) -
TRUSCO NAKAYAMA
[Features]
· The magnet can hold the bit.
· The bit can be elongated for use with the mounting of a replacement handle.Standard Price: MYR 33.52 Days to Ship: 8 Day(s) -
T-Shaped Ratchet Screwdriver Set
TRUSCO NAKAYAMA
[Features]
· A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.Standard Price: MYR 172.95 Days to Ship: 12 Day(s) -
TRUSCO NAKAYAMA
[Features]
· A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.Standard Price: MYR 45.81 Days to Ship: 8 Day(s) -
TRUSCO NAKAYAMA
[Features]
· A bit with shaft diameter of 6.35 mm.
· Can also be used on ratchet screwdrivers.Standard Price: MYR 15.71 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· A bit with shaft diameter of 6.35 mm.
· Can also be used on ratchet screwdrivers.Standard Price: MYR 14.61- Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· Ultra-short design that allows the turning of hexagon bolts in narrow locations.
· A bit with shaft diameter of 6.35 mm.
· Can also be used on ratchet screwdrivers.Standard Price: MYR 22.90- Days to Ship: 8 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· A bit with hexagonal tip.
· A bit with shaft diameter of 6.35 mm.
· Can also be used on ratchet screwdrivers.Standard Price: MYR 16.54- Days to Ship: 9 Day(s) -
ANEX
[Features]
· Includes a ratchet mechanism that enables one tool to be used for three types of Phillips head screws.Standard Price: MYR 57.19 Days to Ship: 8 Day(s) -
Standard Price: MYR 8.71- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 9.83 Days to Ship: 8 Day(s) -
Wooden handle through screwdriver (strong class)
ANEX
[Features]
· High accuracy, black point finish screwdriver with magnet.Standard Price: MYR 69.50- Days to Ship: 12 Day(s) or more -
Standard Price: MYR 43.09 Days to Ship: 16 Day(s) or more -
Precision Pin Vise (Throughput Type)
ANEX
[Features]
· A pin vise resistant to wear with an iron cap and chuck.Standard Price: MYR 62.85- Days to Ship: 9 Day(s) -
Standard Price: MYR 98.52 Days to Ship: 9 Day(s) -
Precision Pin Vise (Storable Type) with Drill
ANEX
[Features]
· A storage type pin vise ideal for drilling small holes and deburring.Standard Price: MYR 77.93 Days to Ship: 9 Day(s) -
Stepped Magnetic Catch MINI【2 Pieces Per Package】
ANEX
[Features]
· Firmly catches screws without dropping them due to the heavy duty magnet.Standard Price: MYR 35.95 Days to Ship: 9 Day(s) -
Heavy Duty Magnetic Screw Catch Rod
ANEX
[Features]
· The screwdriver shaft can be attached and securely catches screws.Standard Price: MYR 27.98 Days to Ship: 8 Day(s) -
ANEX
[Features]
· Firmly catches screws without dropping them due to the heavy duty magnet.Standard Price: MYR 27.23 Days to Ship: 12 Day(s) -
Band Pulling Pin Tool for Watch【1-5 Pieces Per Package】
ANEX
[Features]
· Suitable for adjusting metal wristwatch bands.Standard Price: MYR 16.26- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 37.10 Days to Ship: 12 Day(s) -
Standard Price: MYR 22.66 Days to Ship: 9 Day(s) -
Replacement Stubby Ratchet Screwdriver【695 Pieces Per Package】
ANEX
[Features]
· Rotates smoothly, with excellent workability.Standard Price: MYR 76.48 Days to Ship: 12 Day(s) -
Standard Price: MYR 16.08 Days to Ship: 8 Day(s) -
Standard Price: MYR 113.50 Days to Ship: 4 Day(s) or more -
Electrician's 2-way Screwdriver
SMATO
[Features]
· Screwdriver with both Phillips and flathead bits attachedStandard Price: MYR 109.19 Days to Ship: 4 Day(s) or more -
Swiss Grip Stubby Coin Screwdriver
PB SWISS TOOLS
[Features]
· Coin screwdrivers useful at various worksites.- Volume Discount
Standard Price: MYR 176.90 Days to Ship: 8 Day(s) -
Screwdriver, Rapid Screw Extractor
ENGINEER
Special dedicated screwdriver-type tool for removing stripped countersunk screws that cannot be removed using Neji-saurus screw removal pliers. No hammer required.
[Features]
· Dedicated screwdriver-type tool for removing screws.
· Includes bits that can be used in places where hammering is not possible. (DBZ-51)
· Includes bit for hex socket head screws with damaged screw recesses. (DBZ-53)
· Includes two shock-absorbent rubber sleeves for protecting fingers.
· Includes dedicated handle grip for applying high torque.
[Applications]
· Can be used for countersunk screws with stripped heads.- Volume Discount
Standard Price: MYR 60.83- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 161.58 Days to Ship: 15 Day(s) or more -
Standard Price: MYR 67.13 Days to Ship: 11 Day(s) or more -
Screwdriver for electrical work with fall prevention (with magnet)
TRUSCO NAKAYAMA
[Features]
· Easy to turn and hard to tarnish, with 360 degree rotation function, driver is protected from falling at high altitude work.Standard Price: MYR 46.01- Days to Ship: 8 Day(s) or more -
Ball Ratchet Screwdriver No.2200
VESSEL
A ball grip ratchet screwdriver that makes it easy to apply force and protects hands from pain.
[Features]
· Equipped with a 36-tooth gear ratchet to achieve fine feed and comfortable work.
· Shaft cover prevents short-circuit accidents and convenient for terminal block works with fine-shaft specification.
· Shaft uses bit material and is fully quenched. Replaceable.
[Applications]
· For terminal blocks, distribution boards, telegraphy/telephony, air conditioning, renovations, etc.
· For various screw fastening work.- Volume Discount
Standard Price: MYR 73.90 Days to Ship: 9 Day(s) -
Ball Ratchet Screwdriver Replacement Shaft 2200B-2-150
VESSEL
A replacement shaft for ball grip drivers with a built-in ratchet mechanism.
[Features]
· A replacement shaft for ball ratchet driver that has 36-tooth gears for light maneuverability.
· Shaft uses bit material and is fully quenched.
· Replace by removing the ball part of the ball ratchet driver.
· Ratchet safety structure does not expose the metal portions.
· A slim shaft cover.
[Applications]
· For terminal blocks, distribution boards, telegraphy/telephony, air conditioning, renovations, etc.
· For various screw fastening work.- Volume Discount
Standard Price: MYR 36.53 Days to Ship: 9 Day(s) -
Ball Ratchet Screwdriver Replacement Shaft 2200B-3-150
VESSEL
A replacement shaft for ball grip drivers with a built-in ratchet mechanism.
[Features]
· A replacement shaft for ball ratchet driver that has 36-tooth gears for light maneuverability.
· Shaft uses bit material and is fully quenched.
· Replace by removing the ball part of the ball ratchet driver.
· Ratchet safety structure does not expose the metal portions.
· A slim shaft cover.
[Applications]
· For terminal blocks, distribution boards, telegraphy/telephony, air conditioning, renovations, etc.
· For various screw fastening work.- Volume Discount
Standard Price: MYR 36.53 Days to Ship: 9 Day(s) -
Screwdriver-Type Handle (Spin Handle)
MITOLOY
[Features]
· This is a grip shape that makes it hard to slip.
[Applications]
· This is for tightening and loosening bolts and nuts at work.- Volume Discount
Standard Price: MYR 82.61 Days to Ship: 11 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SIGNET | SIGNET | BESTTOOL | BESTTOOL | BESTTOOL | BESTTOOL | HOZAN | VESSEL | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | SMATO | SMATO | PB SWISS TOOLS | ENGINEER | TGK | TGK | TRUSCO NAKAYAMA | VESSEL | VESSEL | VESSEL | MITOLOY |
| Product Series | Screwdriver Set for Voltage Detection Replacement Set of 6 (for Low Voltage) | Replacement Stubby Ratchet Screwdriver【695 Pieces Per Package】 | Screwdriver for electrical work with fall prevention (with magnet) | ||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 13 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 12 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 8 Day(s) | 5 Day(s) or more | 8 Day(s) | 12 Day(s) or more | 16 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 12 Day(s) | 8 Day(s) or more | 12 Day(s) | 9 Day(s) | 12 Day(s) | 8 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 15 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 11 Day(s) |
| Tip standards | Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Other | Phillips (+)/Flathead(-) | Combination | Flathead (-) | Combination | Phillips (+)/Flathead(-) | Other | Box | Other | Combination | Other | Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | Box | Hexagon | Combination | Phillips (+) | Flathead (-) | Flathead (-) | Phillips (+) | Other | Other | Other | Other | Other | Other | Other | Other | Other | Phillips (+)/Flathead(-) | Other | - | Phillips (+)/Flathead(-) | - | Phillips (+) / Hexagon / Combination | Combination | Combination | Phillips (+) / Flathead (-) | Phillips (+) | Phillips (+) | Phillips (+) | Other |
| Tip size / Phillips (+) | - | No.2 | No.1 / No.2 / No.3 | - | No.00 | No.1 / No.2 | - | No.1 / No.2 | No.00 | - | - | - | No.1 / No.2 / No.3 | - | No.2 | No.1 / No.2 / No.3 | - | - | No.1 / No.2 / No.3 / Other | No.0 | - | - | No.2 | - | - | - | - | - | - | - | - | - | No.2 | - | - | No.2 | - | No.1 / No.2 | - | - | No.1 / No.2 | No.2 | No.2 | No.3 | - |
| Tip size / flathead (-) blade width (mm) B1 | 5.5 ～ 8 | 6 | 4 ～ 6 | - | 1.8 | 6 | 2.5 | 4 ～ 6 | 1.8 | - | - | - | 4 ～ 7 | - | 6 | 4 ～ 7 | - | - | - | - | 2.5 | 10 | - | - | - | - | - | - | - | - | - | - | 30 | - | - | 6 | - | - | - | - | 5.5 ～ 6 | - | - | - | - |
| Shaft length L (mm) | 75 ～ 150 | - | - | - | - | - | 17 | - | 11 | - | - | - | - | - | - | - | - | - | - | 50 ～ 100 | 100 | 250 ～ 300 | 300 | - | - | - | - | - | - | - | - | - | - | 150 | - | 75~150 | 45 | 105 | - | - | 100 ～ 200 | 100 | 150 | 150 | 66 |
| Single Product/Set Classification | Single Item | Single Item | Set Product | Set Product | Set Product | Set Product | Single Item | Set Product | Single Item | Single Item | Set Product | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | - | Single Item / Set Product | Set Product | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item |
| Shaft type | Round | - | - | - | - | - | Round | - | Round | - | - | - | - | - | - | - | - | - | - | Round | Round | Round | Round | Round | Round | - | - | Round | - | - | Round | - | Round | Round | - | Round | - | - | - | - | Round | Round | Round | Round | Round |
| Magnet | NA | NA | NA | NA | NA | NA | NA | - | NA | - | - | Available | - | - | NA | NA | NA | NA | - | NA | NA | Available | Available | - | NA | - | - | Available | - | - | - | - | NA | NA | - | NA | - | - | - | - | Available | - | - | - | NA |
| Shaft through | Available | - | - | - | - | - | NA | - | - | - | - | - | - | - | - | - | - | - | - | NA | NA | Available | NA | - | - | - | - | - | - | - | - | - | NA | NA | - | - | - | - | - | - | NA | NA | NA | NA | NA |
| Bolster | NA | - | - | - | - | - | NA | - | - | - | - | - | - | - | - | - | - | - | - | NA | NA | NA | NA | - | - | - | - | - | - | - | - | - | NA | NA | - | - | - | - | - | - | NA | - | - | - | NA |
| Grip Type | Resin | Resin | Resin | Stainless Steel | Stainless Steel | Stainless Steel | Resin | Resin | - | - | - | - | - | - | - | - | - | - | - | Resin | Resin | Wooden handle | Resin | - | - | - | - | - | - | - | - | - | Resin | Resin | - | Resin | - | - | - | - | Resin | - | - | - | Resin |
| Tip size / flathead (-) blade thickness (mm) B2 | 0.75 ～ 1.1 | - | - | - | - | - | 0.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.4 | 1.2 | - | - | - | - | - | - | - | - | - | - | 6 | - | - | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | 2 ～ 5 | - | - | - | - | 5.5 ～ 12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
-
Tip size / Phillips (+)
-
Tip size / flathead (-) blade width (mm) B1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.0, 1.2, 1.6
- 1.2
- 1.2、1.8、2.3
- 1.2、1.8、2.4、3.0
- 1.3
- 1.35
- 1.4
- 1.4, 2.0, 2.4
- 1.5
- 1.5, 2.0, 3.0
- 1.6
- 1.8
- 1.9
- 1.95
- 2
- 2.1
- 2.3
- 2.4
- 2.5
- 2.5、3.0、4.0
- 2.6
- 2.65
- 3
- 3, 5, 6
- 3.1
- 3.4
- 3.5
- 3.6
- 4
- 4 × 6
- 4.3
- 4.5
- 4.5, 5.5, 7.0
- 4.5、6.0
- 4.7
- 4.9
- 5
- 5.5
- 6
- 6.25
- 6.3
- 6.35
- 6.5
- 7
- 7, 9, 12
- 7.2
- 8
- 8, 9, 10, 12, 14
- 9
- 9, 11
- 9.5
- 10
- 11
- 12
- 13
- 14
- 16
- 18
- 30
- 100
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 80~150
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
-
Shaft type
-
Magnet
-
Shaft through
-
Bolster
-
Grip Type
-
Tip size / flathead (-) blade thickness (mm) B2
- 0.15
- 0.16
- 0.18
- 0.2
- 0.23
- 0.25
- 0.25、0.31、0.36、0.60
- 0.3
- 0.31
- 0.32
- 0.35
- 0.36
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
- 0.95
- 1
- 1.1
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.5
- 3
- 6
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
- -0.9,-1.25,-1.8,-2.3,-3.0,-3.5
- 0.7
- 0.71
- 0.89
- 0.9
- 1.27
- 1.3
- 1.5
- 1.59
- 1.95
- 2
- 2.2
- 2.5
- 2.6
- 2.65
- 2.7
- 3
- 3、4、5、6
- 3.1
- 3.18
- 3.35
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 6.3 × 8
- 6.35
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 17
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- ESCO (831)
- PB SWISS TOOLS (127)
- VESSEL (91)
- ANEX (68)
- ENGINEER (53)
- WERA (46)
- TRUSCO NAKAYAMA (45)
- WIHA (40)
- KTC(KYOTO TOOL) (38)
- TONE (37)
- HOZAN (29)
- SK 11 (19)
- SUNFLAG (17)
- HIRAI KOGU (16)
- KO-KEN TOOL (15)
- AS ONE (14)
- ARC (9)
- SIGNET (7)
- E VALUE (6)
- BONDHUS (5)
- ARC GREATTOOL (4)
- BESTTOOL (4)
- EIGHT TOOL (4)
- HANDIWORK (4)
- HAZET (3)
- TRAD (3)
- WILLIAMS (3)
- FUJIYA (2)
- Ｍ＆Ｍ (2)
- SMATO (2)
- SUEKAGE TOOL (2)
- TGK (2)
- TOP (2)
- HIOS (1)
- MITOLOY (1)
- TAKAGI (1)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy