(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Screwdrivers（Page11）
| Days to Ship |
|
|---|
-
Screwdriver with Anti-Drop Ring
ANEX
The cord does not tangle, even when the handle is turned by the rotating cap. With ring for attaching fall prevention cord. Ideal for work in high places.
Standard Price: MYR 45.54- Days to Ship: 8 Day(s) or more -
Replacement Screwdriver (Incorporating Magnet)
ANEX
Comes with a bolster which can be tightened or loosened with a wrench. An electric screwdriver bit (subtense 6.35 mm hex shaft) can be used. The Phillips part of the bit has double spikes (AAC) securely holding screws. The slotted part of the bit has a special shape that can be inserted into the removal hole of the terminal.
Standard Price: MYR 72.53 Days to Ship: 8 Day(s) -
Standard Price: MYR 57.91 Days to Ship: 8 Day(s) -
Compact ratchet 52 (straight type) set
ANEX
[Features]
·It is ultra-thin with a head width of 20 mm.
·For screwdrivers in narrow spaces.
·Smooth work with 52 fine gears.
·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.
·Uses ultra-short bits.Standard Price: MYR 333.19 Days to Ship: 9 Day(s) -
"Compact Ratchet 52" (Head-up Type)
ANEX
20 mm head width ultra-thin type. Easy to turn screws even in tight spaces with 52 gear fine feed angle. Uses an ultra-short tool bit (total length of 19 mm).
Standard Price: MYR 68.29 Days to Ship: 9 Day(s) -
Standard Price: MYR 98.08 Days to Ship: 8 Day(s) -
HIRAI KOGU
A regular size ratchet type bit replacement type screwdriver with a joint attached to D-88. Includes a 6.35 mm hexagonal 30 mm bit, and can be used as a stubby type by removing the joint. 42-tooth gears provide smooth operation. Lights up in dark areas to prevent loss.
Standard Price: MYR 123.50 Days to Ship: 8 Day(s) -
HIRAI KOGU
It is bent 20 mm under the neck, so final tightening is possible at corner angles where regular screwdrivers cannot reach or in narrow places with obstacles. The shaft has undergone black point processing over the whole length.
Standard Price: MYR 40.86 Days to Ship: 8 Day(s) -
Standard Price: MYR 44.07 Days to Ship: 9 Day(s) -
Electrician's Screwdriver (with Magnet) - Shaft Length 75mm
TRUSCO NAKAYAMA
The bottom of the grip is a ball type, making it easier to turn the screw.
Standard Price: MYR 23.71- Days to Ship: 9 Day(s) -
Anti-falling Electric Work Screwdriver (Magnetic Tip)
TRUSCO NAKAYAMA
360-degree rotation function that is easy to turn but unlikely to get tangled prevents drivers from falling off while working in high places.
Standard Price: MYR 46.01- Days to Ship: 8 Day(s) or more -
TRUSCO NAKAYAMA
A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.
Standard Price: MYR 99.15 Days to Ship: 9 Day(s) -
Plastic handle screwdriver (with magnet)
TRUSCO NAKAYAMA
The bottom of the grip is a ball type, making it easier to turn the screw.
Standard Price: MYR 21.35- Days to Ship: 9 Day(s) -
Standard Price: MYR 21.35- Days to Ship: 8 Day(s) or more -
Wooden handle through screwdriver (with magnet)
TRUSCO NAKAYAMA
Special rust-resistant plating is applied.
Standard Price: MYR 23.84- Days to Ship: 8 Day(s) or more -
TRUSCO NAKAYAMA
This is a universal type switchable screwdriver that can use bits for electric screwdrivers. The cushion handle resists slipping, even when work gloves are worn.
Standard Price: MYR 45.38- Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· Replacement bit for multi-drivers made by TRUSCO NAKAYAMA.Standard Price: MYR 25.45 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· Replacement bit for impact screwdrivers made by TRUSCO NAKAYAMA.Standard Price: MYR 15.88- Days to Ship: 8 Day(s) or more -
TRUSCO NAKAYAMA
The tip rotates when hit with a hammer. Comes into action when turning rusty or fixed screws.
Standard Price: MYR 286.54 Days to Ship: 9 Day(s) -
Mini Impact Screwdriver Set_Bit
TRUSCO NAKAYAMA
[Features]
· Replacement bit for mini impact drivers made by TRUSCO NAKAYAMA.Standard Price: MYR 13.71 Days to Ship: 9 Day(s) -
Mini Impact Screwdriver Set for Rusty Screws
TRUSCO NAKAYAMA
The tip rotates when hit with a hammer. Comes into action when turning rusty or fixed screws. Supports opposite side 6.35 mm hex shafts and single-headed bits.
Standard Price: MYR 89.01 Days to Ship: 8 Day(s) -
Pin Vise (Single-headed/Double-headed)
TRUSCO NAKAYAMA
A pin vise ideal for drilling small holes or deburring.
Standard Price: MYR 34.59- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 41.25- Days to Ship: 8 Day(s) or more -
Craft Form Diamond Screwdriver
WERA
Diamond Screwdriver
[Features]
The blade is coated with fine diamond particles.
Cam out is prevented by the rough diamond particles sticking into the thread, and the hardness of the diamonds reduces blade wear, contributing to longer life.
With specially shaped grip, achieving ease of grip and good fit.
With bolster that can be securely fixed with a wrench.
[Specifications]
Set Classification: Single Item
Shaft Type: Angle
Magnet: None
Grip Type: Rubber- Volume Discount
Standard Price: MYR 70.33- Days to Ship: 8 Day(s) or more -
WERA
The lasered tip provides exceptional bite into screws. Special grip design provides an easy grip and comfortable fit. White carton specifications.
- Volume Discount
Standard Price: MYR 698.35 Days to Ship: 8 Day(s) -
Micro Screwdriver Set - 12 pcs
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 774.43 Days to Ship: 8 Day(s) -
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 386.90 Days to Ship: 8 Day(s) -
Interchangeable ESD Micro Screwdriver (Anti-static Type)
WERA
The product conforms to European Standards EN100-015-1 as the optimal precision screwdriver for assembly of precision electric equipment. Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
- Volume Discount
Standard Price: MYR 272.25- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 127.64 Days to Ship: 9 Day(s) -
Craft Form Compact VARIO _Handle, Total Length: 115mm
WERA
This is a ratchet handle for insertion blades.
- Volume Discount
Standard Price: MYR 307.21 Days to Ship: 8 Day(s) -
Standard Price: MYR 77.78- Days to Ship: 8 Day(s) or more -
Craft Form Compact VARIO _Handle, Total Length: 56mm
WERA
T-type handle for insertion blades.
- Volume Discount
Standard Price: MYR 122.65 Days to Ship: 8 Day(s) or more -
WERA
1,000 V insulation specifications. This product conforms to European Standard EN60900.
- Volume Discount
Standard Price: MYR 45.35- Days to Ship: 5 Day(s) or more -
Craft Form Compact VDE _Handle
WERA
1,000 V insulation specifications. This product conforms to European Standard EN60900. Special grip design provides an easy grip and comfortable fit.
- Volume Discount
Standard Price: MYR 243.60 Days to Ship: 5 Day(s) -
WERA
Body center part opens when tail part is pushed, then bits inside can be replaced for use.
- Volume Discount
Standard Price: MYR 562.40 Days to Ship: 8 Day(s) -
WERA
Replacement drivers are collected in a compact, convenient, hand-held case.
Standard Price: MYR 888.42 Days to Ship: 8 Day(s) -
WERA
The shaft section is flexible, so it's suitable for work in tight spaces.
- Volume Discount
Standard Price: MYR 289.42 Days to Ship: 9 Day(s) -
ESD Bit Holder (Anti-Static Type)
WERA
A bit holder that conforms to European Standards EN100-015-1.
- Volume Discount
Standard Price: MYR 199.58 Days to Ship: 9 Day(s) -
WERA
Ratchet driver bit holder.
[Features]
・ It allows you to tighten screws straight.
・ The ergonomically designed handle helps generate greater torque.
·Angle of rotation: 8°.
·Equipped with a switch for tightening direction.
・ Bits can be inserted without pushing the sleeve of the holder forward.
·The holder sleeve rotates freely.
・ Bits can be exchanged with one hand.
·The kraft foam handle is easy to grip and transmits power.- Volume Discount
Standard Price: MYR 425.94 Days to Ship: 9 Day(s) -
WERA
As the tip has a ballpoint specification, hex socket head cap bolts, and so on, can be turned even if the screwdriver is inclined slightly at an angle. Special grip design provides an easy grip and comfortable fit.
- Volume Discount
Standard Price: MYR 57.16- Days to Ship: 8 Day(s) or more -
WERA
Special grip design provides an easy grip and comfortable fit. Wera's proprietary Torx® HF shape fits Torx® screws perfectly.
- Volume Discount
Standard Price: MYR 139.35- Days to Ship: 8 Day(s) or more -
Impact Screwdriver Set/Single Product
SIGNET
[Features]
· Attach a bit holder to the body to use it as an impact screwdriver with a 5/16 hex bit, or remove the bit holder to attach a 1/2 square socket for use on secured bolts and nuts.
· Usable for both counterclockwise and clockwise (reverse threading) rotation.
· 62008 Set Contents: Body, Phillips Bit #1/2/3, Long Phillips Bit #2/3, Flathead Bit 10 x 1.6 mm, Bit Holder, CaseStandard Price: MYR 33.12- Days to Ship: 7 Day(s) or more -
Stubby Ratchet Screwdriver 52380
SIGNET
The number of gear teeth is 60. Rotates smoothly, with excellent workability. It is a short ratchet driver that's ideal for narrow spaces. Uses anti-slip elastomer resin with which force can be easily applied.
Standard Price: MYR 95.37 Days to Ship: 4 Day(s) or more -
Long Phillips Screwdriver 51497
SIGNET
[Features]
· Easy to grip ergonomic handle reduces fatigue.
· A long type that's effective for work in deep areas.Standard Price: MYR 85.57 Days to Ship: 7 Day(s) or more -
SIGNET
[Features]
· Easy to grip ergonomic handle reduces fatigue.
· With base hexagon, a wrench can be applied for rotation.
· A through type with a grip end that has a striking area, which is ideal for removing fixed screws.Standard Price: MYR 68.57 Days to Ship: 7 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | HIRAI KOGU | HIRAI KOGU | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | SIGNET | SIGNET | SIGNET | SIGNET |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) or more | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 9 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 5 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more |
| Tip standards | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+) | Combination | Phillips (+) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) | - | - | Phillips (+) / Flathead (-) | Combination | Combination | Phillips (+)/Flathead(-) | Combination | - | - | Flathead (-) / Phillips (+)/Flathead(-) / Torx / Hexagon | - | Flathead (-) / Torx / Hexagon | - | Combination | Combination | - | - | - | Ballpoint | Torx | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) |
| Tip size / Phillips (+) | No.2 | No.2 | No.2 | No.1 / No.2 / No.3 | No.2 | No.1 / No.2 | No.1 / No.2 | No.1 / No.2 | No.0 / No.1 / No.2 | No.1 / No.2 | No.2 | No.0 / No.1 / No.2 | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 / No.4 | No.1 / No.2 / No.3 / No.4 | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | No.2 / No.3 / No.4 | No.2 / No.3 / No.4 | No.1 / No.2 | No.1 / No.2 | - | - | No.0 / No.1 / No.2 / No.3 / No.4 | No.1 / No.2 / No.3 | No.00 / No.0 | No.00 / No.0 | No.00 / No.0 / No.1 | - | - | No.1 / No.2 / No.3 | - | - | - | No.1 / No.2 | No.1 / No.2 / No.3 | - | - | - | - | - | No.1 | No.2 | No.2 | No.2 |
| Tip size / flathead (-) blade width (mm) B1 | 6 | 6 | - | 6 | - | - | 6 | - | 1.8 ～ 6 | 5.5 ～ 6 | 6 | 1.8 ～ 6 | 4.5 ～ 8 | 4.5 ～ 9 | 4.5 ～ 9 | 6 | 6 | 8 ～ 10 | 8 ～ 10 | - | - | - | - | 3.5 ～ 14 | 6 ～ 8 | 1.5 ～ 3 | 1.2 ～ 3 | 1.5 ～ 3 | - | - | 4 ～ 7 | - | 3 ～ 6.5 | - | 5.5 ～ 6.5 | 5.5 ～ 8 | - | - | - | - | - | 10 | 6 | - | - |
| Shaft length L (mm) | 100 ～ 150 | 135 | - | - | - | - | - | 100 | - | 75 ～ 200 | 100 ～ 150 | - | 50 ～ 250 | 50 ～ 200 | 50 ～ 200 | - | - | - | - | - | - | - | - | 60 ～ 175 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 60 ～ 150 | 300 | - | - | 300 | 100 |
| Single Product/Set Classification | Single Item | Set Product | Single Item | Set Product | Single Item | Set Product | Set Product | Single Item | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Set Product | Single Item | Set Product | Single Item / Set Product | Single Item | Single Item | Set Product | Set Product | Set Product | Single Item / Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item |
| Shaft type | Round | Round | - | - | - | Round | Square | Round | Round | Round | Round | Round | Round | Round | Round | Square | Square | - | - | - | - | - | - | Square | Round | Round | Round | - | - | - | Round | - | Round | - | Round | Round | - | - | - | Round | Round | - | - | Round | Round |
| Magnet | NA | Available | NA | NA | NA | NA | Available | Available | NA | Available | Available | NA | Available | Available | Available | NA | NA | NA | NA | NA | NA | - | - | NA | NA | NA | NA | NA | - | - | NA | - | NA | - | NA | NA | - | - | - | NA | NA | NA | NA | NA | NA |
| Shaft through | NA | - | - | - | - | - | - | NA | NA | NA | NA | NA | NA | NA | Available | - | - | - | - | - | - | - | - | NA | NA | NA | NA | - | - | - | - | - | NA | - | - | - | - | - | - | NA | NA | - | - | NA | Available |
| Bolster | NA | Included | - | - | - | - | - | NA | NA | NA | NA | NA | NA | NA | NA | - | - | - | - | - | - | - | - | Included | NA | NA | NA | - | - | - | - | - | NA | - | - | - | - | - | - | NA | NA | - | - | NA | NA |
| Grip Type | Rubber | Resin | Resin | Resin | Resin | Rubber | Resin | Resin | Resin | Rubber | Resin | Resin | Resin | Wooden handle | Wooden handle | Rubber | - | - | Stainless Steel | - | Rubber | - | - | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | - | Rubber | - | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | - | Resin | Resin | Resin |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.6 | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | 2.5 ～ 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8 ～ 10 | 0.9 ～ 2 | - | 1.5 ～ 2 | - | - | 3 ～ 6 | - | 2.5 ～ 6 | - | 6 | 3 ～ 5 | - | - | - | 1.5 ～ 12 | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
-
Tip size / Phillips (+)
-
Tip size / flathead (-) blade width (mm) B1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.0, 1.2, 1.6
- 1.2
- 1.2、1.8、2.3
- 1.2、1.8、2.4、3.0
- 1.3
- 1.35
- 1.4
- 1.4, 2.0, 2.4
- 1.5
- 1.5, 2.0, 3.0
- 1.6
- 1.8
- 1.9
- 1.95
- 2
- 2.1
- 2.3
- 2.4
- 2.5
- 2.5、3.0、4.0
- 2.6
- 2.65
- 3
- 3, 5, 6
- 3.1
- 3.4
- 3.5
- 3.6
- 4
- 4 × 6
- 4.3
- 4.5
- 4.5, 5.5, 7.0
- 4.5、6.0
- 4.7
- 4.9
- 5
- 5.5
- 6
- 6.25
- 6.3
- 6.35
- 6.5
- 7
- 7, 9, 12
- 7.2
- 8
- 8, 9, 10, 12, 14
- 9
- 9, 11
- 9.5
- 10
- 11
- 12
- 13
- 14
- 16
- 18
- 30
- 100
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 80~150
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
-
Shaft type
-
Magnet
-
Shaft through
-
Bolster
-
Grip Type
-
Tip size / flathead (-) blade thickness (mm) B2
- 0.15
- 0.16
- 0.18
- 0.2
- 0.23
- 0.25
- 0.25、0.31、0.36、0.60
- 0.3
- 0.31
- 0.32
- 0.35
- 0.36
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
- 0.95
- 1
- 1.1
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.5
- 3
- 6
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
- -0.9,-1.25,-1.8,-2.3,-3.0,-3.5
- 0.7
- 0.71
- 0.89
- 0.9
- 1.27
- 1.3
- 1.5
- 1.59
- 1.95
- 2
- 2.2
- 2.5
- 2.6
- 2.65
- 2.7
- 3
- 3、4、5、6
- 3.1
- 3.18
- 3.35
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 6.3 × 8
- 6.35
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 17
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- ESCO (831)
- PB SWISS TOOLS (127)
- VESSEL (91)
- ANEX (68)
- ENGINEER (53)
- WERA (46)
- TRUSCO NAKAYAMA (45)
- WIHA (40)
- KTC(KYOTO TOOL) (38)
- TONE (37)
- HOZAN (29)
- SK 11 (19)
- SUNFLAG (17)
- HIRAI KOGU (16)
- KO-KEN TOOL (15)
- AS ONE (14)
- ARC (9)
- SIGNET (7)
- E VALUE (6)
- BONDHUS (5)
- ARC GREATTOOL (4)
- BESTTOOL (4)
- EIGHT TOOL (4)
- HANDIWORK (4)
- HAZET (3)
- TRAD (3)
- WILLIAMS (3)
- FUJIYA (2)
- Ｍ＆Ｍ (2)
- SMATO (2)
- SUEKAGE TOOL (2)
- TGK (2)
- TOP (2)
- HIOS (1)
- MITOLOY (1)
- TAKAGI (1)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy