(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Resin Rods
| Days to Ship |
|
|---|
-
- Recommendation
MISUMI
[Features]·Resin rod that allows you to select the outer diameter in increments of 1 mm.
Days to Ship: 5 Day(s) or more -
- Recommendation
Resin Rods - Exterior Surface Unfinished
MISUMI
There is a lineup of resin material cylindrical rods ranging from ø10 to ø200.
Days to Ship: 6 Day(s) or more -
POLYPENCO_JAPAN
Duratron PAI is a material that is extruded / compression-molded from polyamide-imide (PAI) resin. A super engineering plastic with a continuous operating temperature of 250°C.
- Volume Discount
Standard Price: MYR 1,286.70 Days to Ship: 13 Day(s) or more -
POLYPENCO_JAPAN
[Features]
· MC Nylon is made by the polymerization and molding of nylon monomer primary materials under atmospheric pressure. This material has improved nylon characteristics that are not found in injection-molded and extrusion-molded products.Standard Price: MYR 71.92- Days to Ship: 14 Day(s) or more -
Techtron 1000 PPS Cylindrical Rod
POLYPENCO_JAPAN
Techtron 1000PPS is a raw material extruded from linear polyphenylene sulfide (PPS) resin and heat resistant to 220°C. Thermoplastic engineering plastic that features both chemical resistance and dimensional stability.
- Volume Discount
Standard Price: MYR 381.47- Days to Ship: 13 Day(s) or more -
Ketron CA30 PEEK Cylindrical Rod
POLYPENCO_JAPAN
[Features]
· Ketron PEEK is a material that is extruded from polyetheretherketone resin (PEEK). A super engineering thermoplastic that provides balanced chemical resistance, mechanical coatability, and machinability, with a continuous operating temperature of 250°C- Volume Discount
Standard Price: MYR 1,160.88 Days to Ship: 13 Day(s) or more -
Ketron GF30 PEEK Cylindrical Rod
POLYPENCO_JAPAN
Ketron PEEK is a material that is extruded from polyetheretherketone resin (PEEK). A super engineering thermoplastic that provides balanced chemical resistance, mechanical coatability, and machinability, with a continuous operating temperature of 250°C.
Standard Price: MYR 5,978.43 Days to Ship: 13 Day(s) or more -
POLYPENCO_JAPAN
Duratron PEI is a material that is extrusion molded from polyetherimide resin. An engineering thermoplastic with a continuous operating temperature of 170°C.
- Volume Discount
Standard Price: MYR 240.99 Days to Ship: 14 Day(s) or more -
TOMBO No. 9002 NAFLON PTFE Rod
NICHIAS
Fluororesin (PTFE) cylindrical rod. Recommended for connectors, terminals, other electric parts, experimental tool cocks, non-return valve balls, etc.
Standard Price: MYR 21.30- Days to Ship: 1 Day(s) or more -
Resin Rods - Exterior Surface Finished - Standard/ O.D. Configurable
MISUMI
[Features]·You can specify the length of 14-type resin in increments of 1 mm.
Days to Ship: 5 Day(s) or more -
POM-NC Centerless Cylindrical Rod Straight-Slot Tolerance Product (Natural)
POLYPENCO_JAPAN
POLYPENCO acetal is a highly crystalline engineering plastic made from acetal copolymer and a homopolymer as raw materials. Superior fatigue resistance
- Volume Discount
Standard Price: MYR 17.97- Days to Ship: 11 Day(s) or more -
POLYPENCO_JAPAN
MC nylon is used in various industrial applications; it is the most versatile material among engineering plastics.
Excellent mechanical strength and abrasion resistance.- Volume Discount
Standard Price: MYR 36.57- Days to Ship: 4 Day(s) or more -
POLYPENCO_JAPAN
Ertalyte PET-P is an engineering plastic made from polyethylene terephthalate resin, which in particular boasts excellent slidability.
- Volume Discount
Standard Price: MYR 148.64- Days to Ship: 13 Day(s) or more -
ROD Fluoropolymer PFA Cylindrical Rod SWP-R/51-SWP-R
GUNZE
Cylindrical rod extruded from a hot melt type fluororesin that can be used for welding materials and cutting materials.
[Features]
· Continuous molding of long items is possible.
· Round rod extruded from hot melt type fluororesinStandard Price: MYR 136.94- Days to Ship: 6 Day(s) or more -
ROD Fluoropolymer PFA Cylindrical Rod / Ribbon NSP-R
GUNZE
Cylindrical rod / ribbon extruded from a hot melt type fluororesin that can be used for welding materials and cutting materials.
[Features]
· Continuous molding of long items is possible.
· Round rod extruded from hot melt type fluororesinDays to Ship: 13 Day(s) or more -
POLYPENCO_JAPAN
MC Nylon is made by the polymerization and molding of the nylon monomer primary material under atmospheric pressure. This material has improved nylon characteristics that are not found in injection molding and extrusion-molded products.
Standard Price: MYR 207.56- Days to Ship: 13 Day(s) or more -
POLYPENCO_JAPAN
MC Nylon is made by the polymerization and molding of the nylon monomer primary material under atmospheric pressure. This material has improved nylon characteristics that are not found in injection molding and extrusion-molded products.
Standard Price: MYR 267.57- Days to Ship: 14 Day(s) or more -
POLYPENCO_JAPAN
[Features]
· MC Nylon is made by the polymerization and molding of nylon monomer primary materials under atmospheric pressure. This material has improved nylon characteristics that are not found in injection-molded and extrusion-molded products.- Volume Discount
Standard Price: MYR 411.64- Days to Ship: 4 Day(s) or more -
POLYPENCO_JAPAN
[Note] Customers are requested to confirm their system for receiving deliveries in the case of products weighing 30 kg or more. If you have any questions, please contact the QCT marketing center. (0120-343-066)
Standard Price: MYR 398.90- Days to Ship: 13 Day(s) or more -
POLYPENCO_JAPAN
POLYPENCO® Tough-Rod® is a composite rod made of MC nylon and steel docked by unique high frequency welding method.
Standard Price: MYR 525.50- Days to Ship: 14 Day(s) or more -
POLYPENCO_JAPAN
POLYPENCO® Tough-Rod® is a composite rod made of MC nylon and steel docked by unique high frequency welding method.
- Volume Discount
Standard Price: MYR 450.47- Days to Ship: 14 Day(s) or more -
POLYPENCO_JAPAN
POLYPENCO® Tough-Rod® is a composite rod made of MC nylon and steel docked by unique high frequency welding method.
- Volume Discount
Standard Price: MYR 1,097.08- Days to Ship: 13 Day(s) or more -
POM-BC centerless round bar minus tolerance products (Black)
POLYPENCO_JAPAN
POLYPENCO acetal is a highly crystalline engineering plastic made from acetal copolymer and a homopolymer as raw materials. Superior fatigue resistance
- Volume Discount
Standard Price: MYR 15.16- Days to Ship: 14 Day(s) or more -
POM-BC Cylindrical Rod (Black)
POLYPENCO_JAPAN
[Note] Customers are requested to confirm their system for receiving deliveries in the case of products weighing 30 kg or more. If you have any questions, please contact the QCT marketing center. (0120-343-066)
- Volume Discount
Standard Price: MYR 8.85- Days to Ship: 4 Day(s) or more -
POM-NC Cylindrical Rod (Natural)
POLYPENCO_JAPAN
■ The dimensional tolerances of cut size products differ to manufacturer catalog values.
- Volume Discount
Standard Price: MYR 7.16- Days to Ship: 4 Day(s) or more -
Ertalyte PET-P Cylindrical Rod
POLYPENCO_JAPAN
[Note] Customers are requested to confirm their system for receiving deliveries in the case of products weighing 30 kg or more. If you have any questions, please contact the QCT marketing center. (0120-343-066)
- Volume Discount
Standard Price: MYR 44.91- Days to Ship: 13 Day(s) or more -
POLYPENCO_JAPAN
[Note] Customers are requested to confirm their system for receiving deliveries in the case of products weighing 30 kg or more. If you have any questions, please contact the QCT marketing center. (0120-343-066)
- Volume Discount
Standard Price: MYR 381.47- Days to Ship: 19 Day(s) or more -
Tie Bar 1000NA UHMW-PE Cylindrical Rod
POLYPENCO_JAPAN
[Note] Customers are requested to confirm their system for receiving deliveries in the case of products weighing 30 kg or more. If you have any questions, please contact the QCT marketing center. (0120-343-066)
Standard Price: MYR 69.64- Days to Ship: 11 Day(s) or more -
Techtron HPV, PPS Cylindrical Rod
POLYPENCO_JAPAN
[Features]
· Techtron HPVPPS is a product that is based on the superior heat-resistant, chemical-resistant PPS and features significantly improved slidability.
· Applicable for high-temperature sliding parts and high-PV value applications- Volume Discount
Standard Price: MYR 1,429.96- Days to Ship: 14 Day(s) or more -
YODOGAWA
Fluororesin PTFE) Rod. Ideal for materials such as machine parts, electric parts, and chemical plant equipment.
Standard Price: MYR 74.82- Days to Ship: 23 Day(s) or more -
YODOGAWA
Fluororesin FEP) Rod. Ideal for materials such as machine parts, electric parts, and chemical plant equipment. Excels in permeation resistance.
Standard Price: MYR 103.95- Days to Ship: 15 Day(s) or more -
YODOGAWA
Fluororesin PFA) Rod. Ideal for materials such as machine parts, electric parts, and chemical plant equipment.
Standard Price: MYR 98.87- Days to Ship: 15 Day(s) or more -
MITSUBOSHI_BELT
Polyacetal is a resin material with excellent general mechanical properties (1. Low friction coefficient. 2. Self-lubricating with good abrasion resistance. 3. High rigidity and elasticity). It is resistant to organic solvents. Cylindrical rod line up with nominal diameter of ø20 to ø200.
Standard Price: MYR 275.39 Days to Ship: 9 Day(s) or more -
MITSUBOSHI_BELT
Three-star cast nylon has five characteristics (1) a small coefficient of friction (2) good abrasion resistance and self-lubricity (3) insoluble in most alkali and organic solvents (4) very excellent oil resistance (5) excellent resin material with small internal strain. Available in a lineup of 5t to 120t plates.
- Volume Discount
Standard Price: MYR 505.09- Days to Ship: 8 Day(s) or more -
300/500 mm, MC Nylon Cylindrical Rod
ESCO
【Product Specifications】
・Material-MC Nylon (MC901)
・OD (mm)…100
・Length (mm)…300Standard Price: MYR 180.75- Days to Ship: 5 Day(s) or more -
![Polyacetal Round Bar [Copolymer] EA441MA-10](//my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005566580_001.jpg?$product_view_b$)
Polyacetal Round Bar [Copolymer] EA441MA-10
ESCO
【Product Specifications】
・Material-POLYPENCO ACETAL(copolymer)
・Length-1m
・OD (mm)…10Standard Price: MYR 43.73 Days to Ship: 11 Day(s) or more -
![Polyacetal Round Bar [Copolymer] EA441MA-15](//my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005566591.jpg?$product_view_b$)
Polyacetal Round Bar [Copolymer] EA441MA-15
ESCO
【Product Specifications】
・Material-POLYPENCO ACETAL(copolymer)
・Length-1m
・OD (mm)…15Standard Price: MYR 64.38 Days to Ship: 11 Day(s) or more -
![Polyacetal Round Bar [Copolymer] EA441MA-5](//my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005566658.jpg?$product_view_b$)
Polyacetal Round Bar [Copolymer] EA441MA-5
ESCO
【Product Specifications】
・Material-POLYPENCO ACETAL(copolymer)
・Length-1m
・OD (mm)…5Standard Price: MYR 27.15 Days to Ship: 11 Day(s) or more -
![Polyacetal Round Bar [Copolymer] EA441MA-8](//my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005566670.jpg?$product_view_b$)
Polyacetal Round Bar [Copolymer] EA441MA-8
ESCO
【Product Specifications】
・Material-POLYPENCO ACETAL(copolymer)
・Length-1m
・OD (mm)…8Standard Price: MYR 38.18 Days to Ship: 11 Day(s) or more -
Polypropylene Round Bar EA441RA-35
ESCO
【Product Specifications】
・Material-PP (polypropylene)
・Length-1m
・Dia. (mm)…35Standard Price: MYR 240.65 Days to Ship: 11 Day(s) or more
![Polyacetal Round Bar [Copolymer] EA441MA-10](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005566580_001.jpg?$product_view_b$)
![Polyacetal Round Bar [Copolymer] EA441MA-15](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005566591.jpg?$product_view_b$)
![Polyacetal Round Bar [Copolymer] EA441MA-5](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005566658.jpg?$product_view_b$)
![Polyacetal Round Bar [Copolymer] EA441MA-8](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005566670.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Material (Engineering Plastic) |
| Outer Dia. D(Ø) |
| Color |
| Detailed Grade |
| Length(mm) |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | NICHIAS | MISUMI | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | GUNZE | GUNZE | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | YODOGAWA | YODOGAWA | YODOGAWA | MITSUBOSHI_BELT | MITSUBOSHI_BELT | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO |
| Product Series | Resin Rods - Exterior Surface Finished - Standard/ O.D. Configurable | POM-NC Centerless Cylindrical Rod Straight-Slot Tolerance Product (Natural) | POM-BC centerless round bar minus tolerance products (Black) | |||||||||||||||||||||||||||||||||||||
| CAD |
|
|
| |||||||||||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 6 Day(s) or more | 13 Day(s) or more | 14 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 14 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 6 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 14 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 13 Day(s) or more | 14 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 19 Day(s) or more | 11 Day(s) or more | 14 Day(s) or more | 23 Day(s) or more | 15 Day(s) or more | 15 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more |
| Material (Engineering Plastic) | Epoxy Glass ～ Polyacetal | Fluororesin ～ Polyacetal | PAI | MC Nylon | PPS | PEEK | PEEK | PEI | Fluororesin | ABS ～ Ultra High-Molecular-weight Polyethylene | Polyacetal | MC Nylon | PET-P | Fluororesin | Fluororesin | MC Nylon | MC Nylon | MC Nylon | MC Nylon | MC Nylon | MC Nylon | MC Nylon | Polyacetal | Polyacetal | Polyacetal | PET-P | PEI | Ultra High-Molecular-weight Polyethylene | PPS | Fluororesin | Fluororesin | Fluororesin | Polyacetal | MC Nylon | - | - | - | - | - | - |
| Outer Dia. D(Ø) | 3 ～ 20 | 10 ～ 200 | 12 | 10 ～ 30 | 9 ～ 50 | 10 | 30 | 12 | 1 ～ 8 | 3 ～ 50 | 5 ～ 30 | 20 ～ 1000 | 20 ～ 60 | 4 ～ 15 | - | 10 ～ 150 | 60 ～ 120 | 50 ～ 200 | 55 ～ 120 | 50 ～ 200 | 40 ～ 200 | 55 ～ 150 | 4 ～ 25 | 4 ～ 80 | 4 ～ 130 | 10 ～ 12 | 12 ～ 50 | 10 ～ 200 | 20 ～ 50 | 10 ～ 15 | 9 ～ 65 | 9 ～ 30 | 45 | - | - | - | - | - | - | - |
| Color | - | - | Black | Black | Blue | Black | Black | Black | Translucent White | - | White | Blue | White | Translucent White | Translucent White | Black | Black | Brown | Black Gray | Blue | Blue | Blue | Black | Black | White | White | White | White | Blue | Translucent White | Translucent White | Translucent White | White | Blue | - | - | - | - | - | - |
| Detailed Grade | - | - | - | MC501CDR6 | Standard | Conductive | Glass Fiber Reinforced | - | - | - | Standard | MC901 | - | - | - | MC501CDR2 ～ MC501CDR6 | MC501CDR9 | MC602ST | MC801 | MC901 | MC901 | MC901 | Standard | Standard | Standard | - | - | - | Sliding | - | - | - | Standard | Cast Nylon NB | - | - | - | - | - | - |
| Length(mm) | 10 ～ 800 | 20 ～ 1000 | 1200 | 500 ～ 1000 | 1200 | 1000 | 1000 | 1200 | 1000 | 10 ～ 1000 | 1000 ～ 2000 | 100 ～ 1000 | 1000 | 1000 | - | 200 ～ 1000 | 200 | 500 | 500 | 105 | 105 | 105 | 1000 | 1000 | 100 ～ 2000 | 1000 | 1200 | 1000 | 1000 | 1000 | 200 ～ 300 | 200 ～ 300 | 1000 | - | - | - | - | - | - | - |
| Type | Round Bar | Round Bar | - | - | - | - | - | - | - | Round Bar | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![Polyacetal Round Bar [Copolymer] EA441MA-10](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005566580_001.jpg?$product_view_c$)
![Polyacetal Round Bar [Copolymer] EA441MA-15](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005566591.jpg?$product_view_c$)
![Polyacetal Round Bar [Copolymer] EA441MA-5](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005566658.jpg?$product_view_c$)
![Polyacetal Round Bar [Copolymer] EA441MA-8](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005566670.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Material (Engineering Plastic)
-
Outer Dia. D(Ø)
- 1
- 1.5
- 2
- 3
- 4
- 5
- 6
- 8
- 9
- 10
- 11
- 12
- 12.5
- 13
- 14
- 15
- 16
- 17.5
- 18
- 19
- 20
- 22.5
- 23
- 25
- 27.5
- 30
- 31
- 35
- 38
- 40
- 44
- 45
- 50
- 55
- 60
- 65
- 70
- 75
- 80
- 85
- 90
- 95
- 100
- 110
- 120
- 130
- 140
- 150
- 160
- 170
- 180
- 190
- 200
- 225
- 250
- 275
- 300
- 325
- 350
- 375
- 400
- 450
- 500
- 600
- 700
- 800
- 900
- 1000
[6-30/1Ø Unit(s)]
-
Color
-
Detailed Grade
-
Length(mm)
-
Type
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Resin Rods
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy