(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
THK Ball Screw（Flange Shape Details：Round, 2 Sides Cut Flat）
| Days to Ship |
|
|---|
-
Rolled Ball Screw, No Preloading Type (Single Nut) BTK
THK
[Features]
·This is a compact type with a round outer diameter in which the return pipe is embedded in the ball screw nut, and the flange is flattened at two locations to keep the center height low.- Volume Discount
Standard Price: MYR 607.89- Days to Ship: 5 Day(s) or more -
Rolled Ball Screw, Non-Preloading Type (Nut Single Unit) BLK
THK
- Rolled Ball Screw, Non-Preloading Type (Nut Single Unit) BLK series from THK.
- Nuts of Rolled Ball Screws applicable for 6 sizes of shaft diameter: 15mm, 16mm, 20mm, 25mm, 32mm and 36mm and are available in five different lead sizes: 10mm, 16, 20, 25 or 32mm.
- The lead twisting direction for this product is right-handed.
- The overall length of the nut will increase when equipping the QZ lubricating device.
- Using an end-cap method, these models achieve stable motion in a high-speed rotation.- Volume Discount
Standard Price: MYR 1,115.75- Days to Ship: 5 Day(s) or more -
Shaft Tip Complete Product Precision Ball Screw (BNK Type), Shaft Diameter: 6, Lead: 1
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Volume Discount
Standard Price: MYR 1,659.02- Days to Ship: 5 Day(s) or more -
Rolled Ball Screw, No Preloading Type (Nut Single Unit) WTF
THK
[Features]
· THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
· Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
· Also, an abundant standardized lineup is available so you can select the product that's optimal for your application.
· Aside from the C10 class, the shaft tips for the C7 and C8 classes are both standardized for movement amount tolerance, so they can be used for a wide variety of applications.
· After rolling is completed, the ball rolling surface of the screw shaft undergoes a special surface polishing process, finishing the surface at a roughness of 0.20a or less, identical to the precision ball screw product line after screw grinding.
· Rotating ball screw nuts also undergo a ball rolling surface grinding and finishing process just like precision ball screws, which provides durability and smooth operation.
· After rolling is completed, the screw shaft is treated with either high frequency or charcoal immersion quenching, followed by a special surface grinding and finishing process. Due to the manufacturing methods used, this product is comparatively cheaper than the precision ball screw line made through grinding.
· Because the ball screw nut has either a compact labyrinth seal or a brush seal built-in, it operates with low friction and high level dust-proofing, lengthening the life of ball screws.- Volume Discount
Standard Price: MYR 1,219.48- Days to Ship: 21 Day(s) or more -
Shaft Tip Complete Product Precision Ball Screw (BNK Type), Shaft Diameter: 14, Lead: 2
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.- Volume Discount
Standard Price: MYR 1,439.98- Days to Ship: 5 Day(s) or more -
Precision Ball Screw, Shaft End finished product (BNK Shape), Shaft Diameter 8, Lead 2
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Volume Discount
Standard Price: MYR 1,338.57- Days to Ship: 4 Day(s) or more -
Shaft end finished product precision ball screw (BNK type), shaft diameter 10, lead 2
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Volume Discount
Standard Price: MYR 1,452.14- Days to Ship: 5 Day(s) or more -
Shaft Tip Complete Product Precision Ball Screw (BNK Type), Shaft Diameter: 8, Lead: 10
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· This rotary ball screw is a rotary ball screw unit with a unified structure made up of a ball screw nut and a support bearing.
· The support bearing is a large angular bearing with a contact angle of 60° that provides rigidity in the axial direction where more balls are placed.
· The BLR type is available in precision ball screw and rolled ball screw specifications.
· Smooth operation: provides smooth operation in comparison to the straight line movement of rack and pinion systems.
· Also, because the screw shaft does not rotate with ball screw nut drive, there is no jumping rope phenomenon, operation is quiet, and heat produced by the unit is reduced.- Volume Discount
Standard Price: MYR 1,910.50- Days to Ship: 4 Day(s) or more -
Shaft Tip Complete Product Precision Ball Screw (BNK Type), Shaft Diameter: 4, Lead: 1
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
- Volume Discount
Standard Price: MYR 1,496.76- Days to Ship: 5 Day(s) or more -
Shaft Tip Complete Product Precision Ball Screw (BNK Type), Shaft Diameter: 8, Lead: 1
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
[Dust-proofing and lubrication.]
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.- Volume Discount
Standard Price: MYR 1,533.27- Days to Ship: 5 Day(s) or more -
Precision Ball Screw With No Machining on Shaft Ends, MBF Model (No Preload Type)
THK
[Features]
· This product has no machining on the shaft ends, and is a standard series precision ball screw mass-produced at specified lengths.
· Additional work on screw shaft ends can be easily performed.
· Also, a variety of nut shapes are available to suit different purposes such as the BNFN shape double nut, BNF shape single nut, BIF shape offset preload nut, MDK shape miniature ball screw, and MBF shape.
· Dust-proof: The following model number nuts have labyrinth seals mounted.- Volume Discount
Standard Price: MYR 2,311.81- Days to Ship: 12 Day(s) or more -
Precision Ball Screw, Shaft End finished product (BNK Shape), Shaft Diameter 12, Lead 2
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Volume Discount
Standard Price: MYR 1,476.48- Days to Ship: 4 Day(s) or more -
Finished shaft end precision ball screw (BNK type), shaft diameter 14, lead 4
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Volume Discount
Standard Price: MYR 1,460.25- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw Shaft O.D. d(Ø) |
| Product Type |
| Set Product / Single Item |
| Lead(mm) |
| Accuracy Grade |
| Flange Shape Details |
| Flange Shape |
| Shank End Type |
| Cleaning Method |
| Properties / applications |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK |
| Product Series | Rolled Ball Screw, Non-Preloading Type (Nut Single Unit) BLK | Shaft Tip Complete Product Precision Ball Screw (BNK Type), Shaft Diameter: 6, Lead: 1 | Shaft Tip Complete Product Precision Ball Screw (BNK Type), Shaft Diameter: 14, Lead: 2 | Precision Ball Screw, Shaft End finished product (BNK Shape), Shaft Diameter 8, Lead 2 | Shaft end finished product precision ball screw (BNK type), shaft diameter 10, lead 2 | Shaft Tip Complete Product Precision Ball Screw (BNK Type), Shaft Diameter: 8, Lead: 10 | Shaft Tip Complete Product Precision Ball Screw (BNK Type), Shaft Diameter: 4, Lead: 1 | Shaft Tip Complete Product Precision Ball Screw (BNK Type), Shaft Diameter: 8, Lead: 1 | Precision Ball Screw With No Machining on Shaft Ends, MBF Model (No Preload Type) | Precision Ball Screw, Shaft End finished product (BNK Shape), Shaft Diameter 12, Lead 2 | Finished shaft end precision ball screw (BNK type), shaft diameter 14, lead 4 | ||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 21 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more |
| Screw Shaft O.D. d(Ø) | 10 ～ 50 | 15 ～ 50 | 6 | 15 ～ 50 | 14 | 8 | 10 | 8 | 4 | 8 | 4 ～ 14 | 12 | 14 |
| Product Type | Rolled Ball Screw | Rolled Ball Screw | Precision Ball Screw | Rolled Ball Screw | Precision Ball Screw | Precision Ball Screw | Precision Ball Screw | Precision Ball Screw | Precision Ball Screw | Precision Ball Screw | Precision Ball Screw | Precision Ball Screw | Precision Ball Screw |
| Set Product / Single Item | Nut Only | - | - | Nut Only | - | Set Product | - | - | - | - | - | - | - |
| Lead(mm) | 4 ～ 16 | 10 ～ 50 | 1 | 20 ～ 100 | 2 | 2 | 2 | 10 | 1 | 1 | 1 ～ 4 | 2 | 4 |
| Accuracy Grade | - | - | C3 / C5 / C7 | - | C3 / C5 / C7 | C3 / C5 / C7 | C3 / C7 | C5 / C7 | C3 / C5 / C7 | C3 / C5 / C7 | C3 / C5 / C7 | C3 / C5 / C7 | C3 / C5 / C7 |
| Flange Shape Details | Round, 2 Sides Cut Flat | Round, 2 Sides Cut Flat | Round, 2 Sides Cut Flat | Round, 2 Sides Cut Flat | Round, 2 Sides Cut Flat | Round, 2 Sides Cut Flat | Round, 2 Sides Cut Flat | Round, 2 Sides Cut Flat | Round, 2 Sides Cut Flat | Round, 2 Sides Cut Flat | Round, 2 Sides Cut Flat | Round, 2 Sides Cut Flat | Round, 2 Sides Cut Flat |
| Flange Shape | Round-shaped, 2 Set Screw Flats | - | - | Round-shaped, 2 Set Screw Flats | - | Round-shaped, 2 Set Screw Flats | - | - | - | - | - | - | - |
| Shank End Type | - | - | - | - | - | Standard Shaft End Alterations Item | - | - | - | - | - | - | - |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Properties / applications | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Screw Shaft O.D. d(Ø)
-
Product Type
-
Precision Ball Screw -
Rolled Ball Screw -
Ball Screw Related Products
-
-
Set Product / Single Item
- Set Product
- Nut Only
- Screw Shaft Only
-
Lead(mm)
-
Accuracy Grade
-
Flange Shape Details
-
Square Shape -
Round Shape -
Round, 2 Sides Cut Flat -
Block -
Miniature
-
-
Flange Shape
-
Rectangular
-
Round Shape
-
Round-shaped, 2 Set Screw Flats
-
Block
-
-
Shank End Type
- Standard Shaft End Alterations Item
- No Shaft End Alterations
-
Cleaning Method
- Degreasing
- Precision Cleaning
-
Properties / applications
- Clean washing
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Ball Screw
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy