(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Long Neck Ball End Mills (Carbide)（work material：Copper）
| Days to Ship |
|
|---|
-
TSC series carbide long neck ball end mill, 2-flute / long neck model
MISUMI
[Features]
·Long neck shape suitable for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 4 Day(s) or more -
UNION TOOL
[Features]
· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
· Supports a wide range from copper and raw materials to 55 HRC.- Volume Discount
Standard Price: MYR 121.09- Days to Ship: 9 Day(s) or more -
Long-Neck Ball End Mill (for Deep Ribs) NHB-2
NS TOOL
Supports three-dimensional precision deep engraving. Neck relief type suitable to narrow deep processing
Standard Price: MYR 286.90- Days to Ship: 4 Day(s) or more -
TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model
MISUMI
A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge
- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model
MISUMI
[Features]
·High stiffness 2-flute type with length taper shape
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: MYR 172.60- Days to Ship: 4 Day(s) or more -
TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model
MISUMI
[Features]
·High-feed, high stiffness 3-flute taper shape with taper length
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Days to Ship: 4 Day(s) or more -
TSC series carbide long neck ball end mill, 3-flute / long neck model
MISUMI
[Features]
·Long neck ball 3-flute type suitable for high-feed machining of deep cutting areas
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Days to Ship: 4 Day(s) or more -
TSC series carbide long neck ball end mill, 4-flute / long neck model
MISUMI
[Features]
·Long neck ball 4-flute type suitable for high-feed machining of deep cutting areas
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
Days to Ship: 4 Day(s) or more -
MISUMI
CrN coated products that are ideal for copper electrode processing are available at affordable prices
- Volume Discount
- CrN
- Copper
- 2 Flutes
Standard Price: MYR 172.58- Days to Ship: 4 Day(s) or more -
MISUMI
Astonishingly inexpensive! Unprecedented price reduction on the premium diamond coated products!
- Volume Discount
- DIA
- Graphite
- 2 Flutes
Standard Price: MYR 368.04- Days to Ship: 4 Day(s) or more -
XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model
MISUMI
A significant number of specifications has been added to the XAL series that can be widely used for everything from general steel to copper
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Standard Price: MYR 70.84- Days to Ship: 2 Day(s) or more -
Long Neck for Copper Work, Ball CURIBR
NACHI
Ideal for fine processing of copper electrodes. Available in various sizes and can be used for all kinds of machining.
Standard Price: MYR 322.97- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-LN-EBD
OSG
Also ideal for copper electrode machining that requires large protrusions as it has a short blade and long neck shape with high rigidity.
- Volume Discount
Standard Price: MYR 495.51 Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute WXL-HS-LN-EBD
OSG
WXL coating has excellent lubrication and resistance to wear. Can be used for a wide range of work materials and cutting areas
- Volume Discount
Standard Price: MYR 133.51- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD
OSG
Ultra-heat-resistant, ultra-hard WX super coated long neck ball. The effective length can be selected to suit the machining shape.
- Volume Discount
Standard Price: MYR 115.75- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute WXL-LN-EBD
OSG
The hard lubricant film WXL coating is effective for a wide range of processing, from mold materials to copper electrodes.
- Volume Discount
Standard Price: MYR 101.02- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute WX-LN-EBD
OSG
A long neck ball where the effective length can be selected to suit the machining shape. The high toughness carbide base material achieves stable cutting for a wide range of processing.
- Volume Discount
Standard Price: MYR 253.77 Days to Ship: 5 Day(s) or more -
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection- Volume Discount
Standard Price: MYR 102.60- Days to Ship: 5 Day(s) or more -
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection- Volume Discount
Standard Price: MYR 113.12- Days to Ship: 5 Day(s) or more -
HBL, HM Coated 2-Flute Long Shank Ball
UNION TOOL
[Features]
· Long Shank Ball End Middle Series Supporting High-Hardness Materials
· Uses HardMax coating compatible with high-speed machining of high-hardness materials
· Capable of stable, long-life machining for both dry and wet type- Volume Discount
Standard Price: MYR 408.93- Days to Ship: 7 Day(s) or more -
HLB, HM Coat, 2-Flute Long Neck Ball End Mill
UNION TOOL
[Features]
· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
· Provides unprecedented long life and can be used for both dry and wet applications- Volume Discount
Standard Price: MYR 109.61- Days to Ship: 5 Day(s) or more -
HTNB HM coat 2-flute taper neck ball end mill
UNION TOOL
[Features]
· High rigidity realized through an improved taper neck shape.
· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity
· 65 HRC high hardness materials can also be cut- Volume Discount
Standard Price: MYR 222.50- Days to Ship: 6 Day(s) or more -
DIA Coated Series, for Graphite Processing, DCB, 2-Flute Ball
UNION TOOL
[Features]
· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing
· The newly developed diamond coating film achieves outstanding wear resistance
· Adopts a highly adhesive coating film for longer product lifeStandard Price: MYR 560.03- Days to Ship: 6 Day(s) or more -
DIA Coated Series, for Graphite Processing, DCLB, 2-Flute Long Neck Ball End Mill
UNION TOOL
[Features]
· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing
· The newly developed diamond coating film achieves outstanding wear resistance
· Adopts a highly adhesive coating film for longer product life- Volume Discount
Standard Price: MYR 382.44- Days to Ship: 5 Day(s) or more -
![CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439485.jpg?$product_view_b$)
CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]
UNION TOOL
[Features]
· An end mill dedicated for graphite machining.
· Adopts a carbide base material with excellent wear resistance.Standard Price: MYR 444.56- Days to Ship: 10 Day(s) -
CPRB 2-Flute Long Neck Ball End Mill for Resin Machining
UNION TOOL
[Features]
· Long Neck Ball End Mill for Resin Processing
· Ideal for deep grooving thanks to the undercut processing of the neck part- Volume Discount
Standard Price: MYR 180.20- Days to Ship: 5 Day(s) or more -
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_b$)
CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]
UNION TOOL
[Features]
· 3-flute type achieves remarkably high feed. Shortens the roughing time
· Deep cutting is possible, enabling high efficiency machining even with shape processing where feeding speed cannot be increased
· Designed with 3-flute variable split to suppress chatter.
· It uses UTCOAT and can support a wide range from raw materials through low/medium hardness materials up to 55 HRC
· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip shape (excluding R0.75 and below)- Volume Discount
Standard Price: MYR 191.74- Days to Ship: 5 Day(s) or more -
MRBH230 Long-Neck Ball, Hard (for High Hardness)
NS TOOL
The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface
Standard Price: MYR 123.93- Days to Ship: 4 Day(s) or more -
RSB230 Ball-End Mill for Resin Clear Cut
NS TOOL
3x, 5x and 10x blade length, ultra long neck, same diameter type - selectable according to machining shape.
Standard Price: MYR 160.26- Days to Ship: 10 Day(s) -
DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib)
NS TOOL
[Features]
2-flute long end mill.
[Applications]
Suitable for processing aluminum alloys, copper and resins.Standard Price: MYR 376.98- Days to Ship: 10 Day(s) or more -
MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)
NS TOOL
Long Neck Ball End Mill for Short Shank Type (supports shrink fit)
Standard Price: MYR 138.51- Days to Ship: 11 Day(s) -
MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill
NS TOOL
The lower part of the neck is tapered to improve tool rigidity. The cutting depth can be set larger than conventional products
Standard Price: MYR 196.32- Days to Ship: 4 Day(s) or more -
MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)
NS TOOL
Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds
Standard Price: MYR 117.88- Days to Ship: 10 Day(s) or more -
UT COAT 2-Flute Long-Neck Ball CSLEB
UNION TOOL
[Features]
· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
· Supports a wide range from copper and raw materials to 55 HRC.- Volume Discount
Standard Price: MYR 111.98- Days to Ship: 5 Day(s) or more -
HM Coated 2-flute, Long Neck Ball HSLB
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection- Volume Discount
Standard Price: MYR 100.50- Days to Ship: 5 Day(s) or more -
CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC)
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
- Volume Discount
Standard Price: MYR 771.08- Days to Ship: 10 Day(s) -
Carbide 2-Flute Long Ball End Mill 30° B242X
7 LEADERS
[Features]
· 2-flute long shank ball end mill that supports a wide range of work materials.
· Capable of continuous stable cutting.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.- Volume Discount
Standard Price: MYR 129.74- Days to Ship: 5 Day(s) or more -
Carbide 2-Flute Ultra Long Ball End Mill 30° B246X
7 LEADERS
[Features]
· 2-flute ultra-long shank ball end mill that supports a wide range of work materials.
· Capable of continuous stable cutting.
· Nanoparticle multilayer coating.
· Suitable for a wide range of work materials from general steel to high hardness steel.Standard Price: MYR 301.49- Days to Ship: 6 Day(s) or more -
MRBLN230-6 MUGEN COATING Long Neck Ball End Mill ⌀6 Shank Diameter Type (For Deep Ribbing)
NS TOOL
[Features]
· NS original deep ribbing end mill with MUGEN coating applied.
· Neck relief type suitable for narrow deep processing.Standard Price: MYR 451.57- Days to Ship: 4 Day(s) or more -
Long-Neck Ball End Mill For Copper Electrodes DRB230
NS TOOL
[Features]
· A long-neck ball end mill with an exceptionally long tool life, offering high quality when machining copper electrodes.Standard Price: MYR 281.29- Days to Ship: 10 Day(s) or more
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
![CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439485.jpg?$product_view_b$)
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | UNION TOOL | NS TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI | OSG | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | UNION TOOL | UNION TOOL | SANDVIK | 7 LEADERS | 7 LEADERS | NS TOOL | NS TOOL |
| Product Series | TSC series carbide long neck ball end mill, 2-flute / long neck model | TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model | TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model | TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model | TSC series carbide long neck ball end mill, 3-flute / long neck model | TSC series carbide long neck ball end mill, 4-flute / long neck model | XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model | Long Neck Ball Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-LN-EBD | HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product] | DIA Coated Series, for Graphite Processing, DCB, 2-Flute Ball | DIA Coated Series, for Graphite Processing, DCLB, 2-Flute Long Neck Ball End Mill | CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product] | CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product] | DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib) | MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting) | MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing) | CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC) | MRBLN230-6 MUGEN COATING Long Neck Ball End Mill ⌀6 Shank Diameter Type (For Deep Ribbing) | ||||||||||||||||||||||
| CAD |
|
|
|
| ||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 10 Day(s) | 10 Day(s) or more | 11 Day(s) | 4 Day(s) or more | 10 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 5 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||
| R Size(mm) | 0.05 ～ 3 | 0.1 ～ 5 | 0.4 ～ 3 | 0.5 ～ 5 | 0.15 ～ 5 | 0.5 ～ 3 | 0.5 ～ 3 | 1 ～ 3 | 0.2 ～ 2 | 0.2 ～ 3 | 0.05 ～ 3 | 0.2 ～ 1 | 0.5 | 0.3 ～ 1.5 | 0.1 ～ 3 | 0.05 ～ 3 | 0.5 ～ 1 | 0.03 ～ 6 | 0.1 ～ 0.75 | 1.5 ～ 6 | 0.4 ～ 3 | 0.1 ～ 2 | 0.5 ～ 6 | 0.2 ～ 3 | 1 ～ 6 | 0.2 ～ 3 | 0.3 ～ 6 | 0.05 ～ 3 | 0.1 ～ 3 | 0.5 ～ 3 | 0.1 ～ 1.5 | 0.1 ～ 2 | 0.05 ～ 3 | 0.05 ～ 3 | 0.05 ～ 3 | 0.2 ～ 0.5 | 1.5 ～ 6 | 1 ～ 6 | 0.15 ～ 1 | 0.05 ～ 3 |
| Blade length (ℓ)(mm) | 0.07 ～ 8 | 0.3 ～ 15 | 0.6 ～ 6 | - | 0.3 ～ 8 | 0.8 ～ 6 | 0.8 ～ 4.8 | 1.6 ～ 6 | 0.4 ～ 4 | 0.6 ～ 7.5 | 0.07 ～ 6 | 0.4 ～ 2 | 1.5 | 0.5 ～ 2.4 | 0.16 ～ 4.8 | 0.08 ～ 6 | 0.8 ～ 1.6 | 0.06 ～ 15 | 0.3 ～ 2.5 | 4.5 ～ 25 | 0.64 ～ 4.8 | 0.16 ～ 50 | 5 ～ 55 | 0.32 ～ 6 | 10 ～ 55 | 0.4 ～ 6 | 0.9 ～ 18 | 0.07 ～ 6 | 0.6 ～ 30 | 1.5 ～ 9 | 0.15 ～ 2.5 | 0.2 ～ 4 | 0.07 ～ 6 | 0.08 ～ 4.8 | 0.08 ～ 4.8 | 0.3 ～ 1 | 6 ～ 22 | 4 ～ 22 | 0.3 ～ 2 | 0.15 ～ 6 |
| Underneck length (ℓ1)(mm) | 0.2 ～ 60 | - | 6 ～ 50 | 4 ～ 55 | 2 ～ 60 | 7 ～ 60 | 3 ～ 50 | 4 ～ 30 | 2 ～ 40 | 2 ～ 60 | 0.2 ～ 60 | 1.5 ～ 35 | 6 | 1.5 ～ 12 | 0.5 ～ 40 | 0.3 ～ 50 | 7 ～ 8 | - | - | - | 3 ～ 30 | 1.5 ～ 62 | - | 2 ～ 80 | - | 1 ～ 50 | - | 0.2 ～ 50 | 2 ～ 80 | 4 ～ 50 | 0.5 ～ 20 | 1 ～ 60 | 0.3 ～ 50 | 0.3 ～ 60 | 0.3 ～ 60 | 1 ～ 10 | - | - | 3 ～ 20 | - |
| Shank diameter (d)(mm) | 3 ～ 8 | 4 ～ 10 | 4 ～ 6 | 6 ～ 10 | 4 ～ 12 | 4 ～ 8 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 3 ～ 6 | 4 ～ 6 | 6 | 4 | 4 ～ 6 | 3 ～ 6 | 4 | 4 ～ 12 | 4 | 3 ～ 12 | 4 ～ 6 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 3 ～ 6 | 4 ～ 8 | 4 | 4 ～ 8 | 4 ～ 6 | 4 ～ 6 | 3 ～ 6 | 6 | 4 ～ 12 | 3 ～ 12 | - | 4 ～ 6 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 3 | 2 ～ 3 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | - |
| Overall Length (L)(mm) | 40 ～ 110 | 50 ～ 100 | 45 ～ 120 | 70 ～ 90 | 50 ～ 110 | 50 ～ 110 | 50 ～ 110 | 50 ～ 70 | 50 ～ 110 | 50 ～ 110 | 50 ～ 110 | 45 ～ 80 | 60 | 35 ～ 40 | 45 ～ 90 | 45 ～ 120 | 45 | 50 ～ 100 | 50 | 80 ～ 200 | 45 ～ 80 | 4 ～ 120 | 60 ～ 180 | 45 ～ 120 | 70 ～ 200 | 45 ～ 120 | 50 ～ 120 | 45 ～ 120 | 50 ～ 130 | 50 ～ 110 | 35 ～ 50 | 50 ～ 110 | 45 ～ 120 | 45 ～ 120 | 45 ～ 120 | 54 ～ 57 | 80 ～ 180 | 100 ～ 210 | - | 45 ～ 100 |
| work material | Copper[○] | Copper[◎] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] | Copper[◎] | Copper[◎] | Copper[◎] | Copper[◎] | Copper[○] | Copper[◎] | Copper[○] | Copper[○] | Copper[◎] | Copper[◎] | Copper[◎] | Copper[○/◎] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[◎] | Copper[○] | Copper[◎] | Copper[◎] | Copper[◎] | Copper[◎] | Copper[◎] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] |
| R Precision(μm) | -0.007 ~ +0.003 ～ ±0.005 | -0.007～0.007 ～ -0.005～0.005 | 0.01～-0.01 | ±0.01 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | ±0.005 | ±0.01 | -0.007 ~ +0.003 ～ ±0.005 | -0.007～+0.003 | -0.01～+0.01 | -0.005～+0.005 | -0.005～+0.005 | -0.005～+0.005 | -0.01～+0.01 | -0.007～0.007 ～ -0.002～0.002 | -0.005～0.005 | -0.007～0.007 ～ -0.005～0.005 | -0.002～0.002 | -0.005～0.005 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 ～ -0.005～0.005 | 0.005～-0.005 | 0.005～-0.005 ～ 0.01～-0.01 | 0.01～-0.01 | 0.005～-0.005 | 0.005～-0.005 ～ 0.01～-0.01 | 0.005～-0.005 ～ 0.01～-0.01 | -0.005～0.005 ～ -0.002～0.002 | -0.005～0.005 ～ -0.002～0.002 | - | ±10 | ±10 | -0.01 to 0.01 | ±2 ～ ±3 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface | Curved surface / Engraving / R Groove | Curved surface / Engraving / R Groove | Curved surface | Curved surface |
| Coating | For High Hardness (Silicon Group) | TiCN | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | CrN | Dia Coat | For General Steels (AlCrN, etc.) | CrN | CrN | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.) | Dia Coat | Dia Coat | Non-Coated | Non-Coated | TiCN | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | TiAlN | TiAlN | TiAlN | TiCN | For High Hardness (Silicon Group) | Other | - | - | TiAlN | DLC |
| Type | Long-Neck Ball | Ball | Long-Neck Ball | Long-Neck Ball / Spherical Ball | Tapered neck ball | Tapered neck ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball | Ball | Long-Neck Ball | Tapered neck ball | Ball | Long-Neck Ball | Ball | Long-Neck Ball | Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Tapered neck ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball | Long-Neck Ball | Long-Neck Ball |
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_c$)
![CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439485.jpg?$product_view_c$)
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
R Size(mm)
-
Blade length (ℓ)(mm)
-
0.06～0.96
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.28
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.28
- 1.3
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 2.8
- 2.9
-
3～3.85
- 3
- 3.2
- 3.5
- 3.75
- 3.85
-
4～4.8
- 4
- 4.2
- 4.5
- 4.8
-
5～5.2
- 5
- 5.2
-
6～6.7
- 6
- 6.7
-
7～7.5
- 7
- 7.5
-
8～8.2
- 8
- 8.2
-
9
-
10～10.5
- 10
- 10.5
-
11
-
12
-
13～13.5
- 13
- 13.5
-
14
-
15
-
16.5
-
18
-
20
-
22
-
25
-
30
-
40
-
50
-
55
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
R Precision(μm)
-
Machining Application
-
Coating
-
Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Narrow search by specifying Manufacturer
-
- UNION TOOL (13)
- NS TOOL (9)
- OSG (5)
- 7 LEADERS (2)
- NACHI (1)
- SANDVIK (1)
- KYOWA SEIKO (0)
- EIKOSHA (0)
CAD
-
- 2D
- 3D
Related Categories to Long Neck Ball End Mills (Carbide)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy