(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Long Neck Ball End Mills (Carbide)（work material：High Hardness Steel-HRC60）
| Days to Ship |
|
|---|
-
MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model
MISUMI
High-performance MRC series is available in the industry's largest number of sizes
- Volume Discount
- MR
- General Steel
- 2 Flutes
- S (Short)
Standard Price: MYR 80.72- Days to Ship: 4 Day(s) or more -
![HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439182.jpg?$product_view_b$)
HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]
UNION TOOL
[Features]
· Significantly enhances machining efficiency.
· The chip discharge capacity is up to 27 times higher (compared to the manufacturer's previous product)
· With the newly developed ball tip shape, the bottom surface is treated with non-polish processing
· Reasonable price setting
· Has 4 flutes but is still cheaper than 3-flute types from other companies- Volume Discount
Standard Price: MYR 197.80- Days to Ship: 5 Day(s) or more -
CBN-LBF 2-Flute High Grade Long-Neck Ball
UNION TOOL
[Features]
· Uses CBN materials (ideal for machining high hardness materials) and features an improved blade shape for high precision and a long service life.
· Excellent abrasion and chipping resistance, ensuring a good machining surface roughness and precision, even when machining for long periods.
· Shank diameter tolerance: 0/-0.004 mm
· Ball radius accuracy: With nominal radius as a base ±0.003 mmStandard Price: MYR 782.33- Days to Ship: 5 Day(s) or more -
TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model
MISUMI
[Features]
·3-flute, short-flute length shape is used to resist chattering and enable high-feed machining
·Taper neck is effective in suppressing chattering
·Machining of high hardness steel up to 65HRC is possible
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
Standard Price: MYR 300.69- Days to Ship: 4 Day(s) or more -
Long Neck Ball Type, 2-Flute CBN-LN-SXB
OSG
2-Flute Long Neck Ball End Type CBN-LN-SXB
·Achieves deep cut milling even with small diameters. Good cutting quality.
With the effect of spiral gash, both cutting edge strength and sharpness are achieved.
·CBN sintered body is used for the flute material.Standard Price: MYR 871.43- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD
OSG
Ultra-heat-resistant, ultra-hard WX super coated long neck ball. The effective length can be selected to suit the machining shape.
- Volume Discount
Standard Price: MYR 115.75- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute WX-LN-EBD
OSG
A long neck ball where the effective length can be selected to suit the machining shape. The high toughness carbide base material achieves stable cutting for a wide range of processing.
- Volume Discount
Standard Price: MYR 253.77 Days to Ship: 5 Day(s) or more -
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection- Volume Discount
Standard Price: MYR 102.60- Days to Ship: 5 Day(s) or more -
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection- Volume Discount
Standard Price: MYR 113.12- Days to Ship: 5 Day(s) or more -
HBL, HM Coated 2-Flute Long Shank Ball
UNION TOOL
[Features]
· Long Shank Ball End Middle Series Supporting High-Hardness Materials
· Uses HardMax coating compatible with high-speed machining of high-hardness materials
· Capable of stable, long-life machining for both dry and wet type- Volume Discount
Standard Price: MYR 408.93- Days to Ship: 7 Day(s) or more -
HLB, HM Coat, 2-Flute Long Neck Ball End Mill
UNION TOOL
[Features]
· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
· Provides unprecedented long life and can be used for both dry and wet applications- Volume Discount
Standard Price: MYR 109.61- Days to Ship: 5 Day(s) or more -
HFB, HM Coated 4-Flute High-Efficiency Short Shank Ball
UNION TOOL
[Features]
· Supports Shrink Fit Holders
· Suppresses unnecessary tool protrusion to enable higher precision processing
· Reduces processes in cutting
· Increases machining efficiency through combination with shrink fit holder.- Volume Discount
Standard Price: MYR 203.10- Days to Ship: 6 Day(s) or more -
HTNB HM coat 2-flute taper neck ball end mill
UNION TOOL
[Features]
· High rigidity realized through an improved taper neck shape.
· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity
· 65 HRC high hardness materials can also be cut- Volume Discount
Standard Price: MYR 222.50- Days to Ship: 6 Day(s) or more -
SSBL200 CBN Super Speed Long Neck Ball End Mill
NS TOOL
Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools
Standard Price: MYR 942.34- Days to Ship: 8 Day(s) or more -
MRBH230 Long-Neck Ball, Hard (for High Hardness)
NS TOOL
The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface
Standard Price: MYR 123.93- Days to Ship: 4 Day(s) or more -
MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)
NS TOOL
Long Neck Ball End Mill for Short Shank Type (supports shrink fit)
Standard Price: MYR 138.51- Days to Ship: 11 Day(s) -
MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)
NS TOOL
Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds
Standard Price: MYR 117.88- Days to Ship: 10 Day(s) or more -
HM Coated 2-flute, Long Neck Ball HSLB
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection- Volume Discount
Standard Price: MYR 100.50- Days to Ship: 5 Day(s) or more -
CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC)
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
- Volume Discount
Standard Price: MYR 771.08- Days to Ship: 10 Day(s) -
Ball End Mill Center Cut Spherical Design R 216.6 (Hardness 43 ≤ HRC ≤ 63)
SANDVIK
High-quality carbide end mill CoroMill® for a highly productive, efficient and reliable milling solutionPlura profiling carbide ball end mill
- Volume Discount
Standard Price: MYR 836.75- Days to Ship: 10 Day(s) -
SSPBL220 CBN Super Spiral Long Neck Ball End Mill
NS TOOL
[Features]
· Supports deeper milling by utilizing the features of SSPB220 and through the use of a spiral ball shape and strong back taper shape to improve both sharpness and the chipping resistance of cutting edges.Standard Price: MYR 1,056.32- Days to Ship: 11 Day(s) -
CBN-LBSF 2-Flute Super Finishing Long-Neck Ball End Mill
UNION TOOL
[Features]
· Uses CBN materials (ideal for machining high hardness materials) and features an improved blade shape for high precision and a long service life.
· Excellent abrasion and chipping resistance, ensuring a good machining surface roughness and precision, even when machining for long periods.
· Shank diameter tolerance: 0/-0.004 mm
· Ball radius accuracy: With nominal radius as a base ±0.002 mmStandard Price: MYR 844.11- Days to Ship: 5 Day(s) or more
![HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439182.jpg?$product_view_b$)
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | UNION TOOL | UNION TOOL | MISUMI | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | UNION TOOL | SANDVIK | SANDVIK | NS TOOL | UNION TOOL |
| Product Series | MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model | HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product] | TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model | HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product] | MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting) | MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing) | CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC) | Ball End Mill Center Cut Spherical Design R 216.6 (Hardness 43 ≤ HRC ≤ 63) | ||||||||||||||
| CAD |
|
|
| |||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 11 Day(s) | 10 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 10 Day(s) | 11 Day(s) | 5 Day(s) or more |
| Specifications |
|
| ||||||||||||||||||||
| R Size(mm) | 0.05 ～ 3 | 1 ～ 6 | 0.15 ～ 0.5 | 0.75 ～ 3 | 0.2 ～ 1.5 | 0.1 ～ 3 | 0.5 ～ 1 | 0.03 ～ 6 | 0.1 ～ 0.75 | 1.5 ～ 6 | 0.4 ～ 3 | 1 ～ 6 | 0.1 ～ 2 | 0.05 ～ 1 | 0.05 ～ 3 | 0.1 ～ 1.5 | 0.05 ～ 3 | 0.05 ～ 3 | 0.2 ～ 0.5 | 0.5 ～ 8 | 0.1 ～ 1 | 0.3 ～ 1 |
| Blade length (ℓ)(mm) | 0.07 ～ 6 | 3 ～ 18 | 0.24 ～ 0.7 | 1.2 ～ 4.8 | 0.3 ～ 1.8 | 0.16 ～ 4.8 | 0.8 ～ 1.6 | 0.06 ～ 15 | 0.3 ～ 2.5 | 4.5 ～ 25 | 0.64 ～ 4.8 | 3 ～ 18 | 0.16 ～ 50 | 0.08 ～ 1.2 | 0.07 ～ 6 | 0.15 ～ 2.5 | 0.07 ～ 6 | 0.08 ～ 4.8 | 0.3 ～ 1 | 2 ～ 15 | 0.15 ～ 1.2 | 0.48 ～ 1.2 |
| Underneck length (ℓ1)(mm) | 0.2 ～ 50 | - | - | 20 ～ 50 | 2 ～ 15 | 0.5 ～ 40 | 7 ～ 8 | - | - | - | 3 ～ 30 | - | 1.5 ～ 62 | 0.3 ～ 10 | 0.2 ～ 50 | 0.5 ～ 20 | 0.3 ～ 50 | 0.3 ～ 60 | 1 ～ 10 | 20 ～ 61 | 0.9 ～ 20 | - |
| Shank diameter (d)(mm) | 4 ～ 6 | 4 ～ 12 | 4 | 4 ～ 8 | 4 ～ 6 | 4 ～ 6 | 4 | 4 ～ 12 | 4 | 3 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 | 4 ～ 6 | 4 | 4 ～ 6 | 3 ～ 6 | 6 | 6 ～ 16 | - | 4 |
| Number of flutes(sheet) | 2 | 4 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 ～ 4 | 2 | 2 |
| Overall Length (L)(mm) | 50 ～ 110 | 50 ～ 110 | 50 | 70 ～ 110 | 45 ～ 50 | 45 ～ 90 | 45 | 50 ～ 100 | 50 | 80 ～ 200 | 45 ～ 80 | 40 ～ 60 | 4 ～ 120 | 50 ～ 53 | 45 ～ 120 | 35 ～ 50 | 45 ～ 120 | 45 ～ 120 | 54 ～ 57 | 75 ～ 150 | 51 ～ 53 | 50 |
| work material | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[○/◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] |
| R Precision(μm) | ±0.005 | -0.01～0.01 ～ -0.005～0.005 | ±3 | -0.007 ~ +0.003 ～ ±0.005 | -0.01～+0.01 | -0.005～+0.005 | -0.01～+0.01 | -0.007～0.007 ～ -0.002～0.002 | -0.005～0.005 | -0.007～0.007 ～ -0.005～0.005 | -0.002～0.002 | -0.01～0.01 ～ -0.005～0.005 | -0.005～0.005 | 0.005～-0.005 | 0.005～-0.005 | 0.005～-0.005 | 0.005～-0.005 ～ 0.01～-0.01 | -0.005～0.005 ～ -0.002～0.002 | - | - | -0.003 to 0.003 | ±2 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | - | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface | Curved surface | Curved surface | - |
| Coating | MRC | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.) | Non-Coated | For High Hardness (Silicon Group) | TiAlN | TiAlN | For High Hardness (Silicon Group) | Other | Other | Non-Coated | Non-Coated |
| Type | Long-Neck Ball | Ball | Long-Neck Ball | Tapered neck ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball | Ball | Long-Neck Ball | Ball | Tapered neck ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Long-Neck Ball | Long-Neck Ball |
![HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439182.jpg?$product_view_c$)
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
R Size(mm)
-
Blade length (ℓ)(mm)
-
0.06～0.96
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.28
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.28
- 1.3
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 2.8
- 2.9
-
3～3.85
- 3
- 3.2
- 3.5
- 3.75
- 3.85
-
4～4.8
- 4
- 4.2
- 4.5
- 4.8
-
5～5.2
- 5
- 5.2
-
6～6.7
- 6
- 6.7
-
7～7.5
- 7
- 7.5
-
8～8.2
- 8
- 8.2
-
9
-
10～10.5
- 10
- 10.5
-
11
-
12
-
13～13.5
- 13
- 13.5
-
14
-
15
-
16.5
-
18
-
20
-
22
-
25
-
30
-
40
-
50
-
55
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
R Precision(μm)
-
Machining Application
-
Coating
-
Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Narrow search by specifying Manufacturer
-
- UNION TOOL (10)
- NS TOOL (5)
- OSG (3)
- SANDVIK (2)
- KYOWA SEIKO (0)
- NACHI (0)
- 7 LEADERS (0)
- EIKOSHA (0)
CAD
-
- 2D
- 3D
Related Categories to Long Neck Ball End Mills (Carbide)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy