(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Multi-Function Square End Mills (Carbide)（Machining Application：Groove）
| Days to Ship |
|
|---|
-
XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price
- Volume Discount
- XAL
- General Steel
- 3 Flutes
Standard Price: MYR 98.27- Days to Ship: 4 Day(s) or more -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·This product has an intermediate flute length between TSC-HEM3S (short flute length) and TSC-HEM3R (regular flute length), so it is called "SR flute length."
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 3 Flutes
- SR
Days to Ship: 4 Day(s) or more -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- L (Long)
Days to Ship: 4 Day(s) or more -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface (product in Fig. 3 only)
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Standard Price: MYR 327.16- Days to Ship: 4 Day(s) or more -
TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model
MISUMI
Demonstrates phenomenal performance in processing the difficult-to-cut SUS304
- Volume Discount
- TS
- SUS
- 3 Flutes
- S (Short)
Standard Price: MYR 325.39- Days to Ship: 4 Day(s) or more -
MISUMI
Ideal for the standing-wall finish of stainless steel
- Volume Discount
- TS
- SUS
- 3 Flutes
- R (Regular)
Standard Price: MYR 449.19- Days to Ship: 4 Day(s) or more -
DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model
MISUMI
3-flute structure that's excellent in discharging chips
- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model
MISUMI
Given the rounded edge on the blade rear end, it suppresses machining streaks
- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- B (Stub)
Standard Price: MYR 271.15- Days to Ship: 4 Day(s) or more -
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 45° high torsion end mill with a long contact surface between work material and blade that provides a long tool life.- Volume Discount
Standard Price: MYR 149.74- Days to Ship: 4 Day(s) or more -
VAC Series Carbide 4-Flute Uneven Lead Square End Mill
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Suppresses chattering with unequal lead and unequal flutes
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Stable machining is possible while maintaining finished surface accuracy
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 165.42- Days to Ship: 4 Day(s) or more -
VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)
MISUMI
[Features]
・Adopts unequal leads to suppress chatter and achieve high efficiency machining
・Optimum groove shape realizes smooth chip discharge
・Minimum electrical conductivity
・Can be re-polished.- Volume Discount
Standard Price: MYR 162.62- Days to Ship: 4 Day(s) or more -
VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)
MISUMI
[Features]
·Chattering is suppressed by unequal leads and unequal flutes. Stable machining is possible while maintaining finished surface accuracy
·Ultra-fine grain cemented carbide base material is used. Coating with excellent adhesion and heat resistance enables processing under high-speed conditions
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 144.66- Days to Ship: 4 Day(s) or more -
HGGCNXS HG Coated Carbide NX Short Blade
SANKO MFG
Chip discharge is excellent and high speed machining is possible. A short blade which has adopted a new standard considering usability of the blade length.
Standard Price: MYR 240.54- Days to Ship: 7 Day(s) or more -
SANKO MFG
[Features]
· Newly developed coating and new shape achieve a long life.
· Excellent chip discharge.
· Capable of high-speed machining.
· A new standard considering usability of the blade length is adopted.Standard Price: MYR 300.44- Days to Ship: 7 Day(s) or more -
SAGCXF SA Coated Carbide for GCX Groove
SANKO MFG
An end mill with excellent rigidity which makes it ideal for groove machining. Side processing is also possible.
Standard Price: MYR 334.12- Days to Ship: 7 Day(s) or more -
SAGCX SA Coated 6-Flute Carbide End Mill
SANKO MFG
[Features]
· Excellent rigidity; ideal for high-speed machining.
· Achieves precision finishing with little tilt.Standard Price: MYR 347.25- Days to Ship: 7 Day(s) or more -
SAGCXLS SA Coated Carbide 6-Flute Long Shank
SANKO MFG
Excellent rigidity; ideal for high-speed machining. Achieves precision finishing with little tilt. The long shank allows for machining in deep sections.
[Features]
· SAGCX long blade, long shank end mill.
· Deep sections can be machinedStandard Price: MYR 517.44- Days to Ship: 7 Day(s) or more -
SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated
OKAZAKI SEIKO
High torsion type 3-flute endmill for aluminum with sharp corners and a blade for aluminum.
- Volume Discount
Standard Price: MYR 221.55- Days to Ship: 9 Day(s) -
SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated
OKAZAKI SEIKO
The weld prevention effect of the pure DLC coating provides an astonishingly long service life.
- Volume Discount
Standard Price: MYR 357.61- Days to Ship: 9 Day(s) or more -
SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated
OKAZAKI SEIKO
A long shank type, it also features neck relief, enabling deep engraving operation.
- Volume Discount
Standard Price: MYR 309.31- Days to Ship: 14 Day(s) -
SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated
OKAZAKI SEIKO
Long high helical endmill for aluminum, 3-flute, pure DLC coating
- Volume Discount
Standard Price: MYR 550.66- Days to Ship: 14 Day(s) -
SEE3 High-Helix End Mill, 3-Flute, Non-Coated
OKAZAKI SEIKO
3-flute type with high-torsion grooves enables everything from rough machining to finishing
- Volume Discount
Standard Price: MYR 170.11- Days to Ship: 6 Day(s) or more -
SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated
OKAZAKI SEIKO
A multi-purpose 3-flute high torsion end mill with support from rough machining to finish machining.
- Volume Discount
Standard Price: MYR 151.45- Days to Ship: 14 Day(s) -
3-Flute Super One-Cut End Mill DV-SOCS3
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 240.66- Days to Ship: 14 Day(s) -
Solid End Mill for Aluminum Machining (Regular Blade) AL-SEES2 Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 192.91- Days to Ship: 5 Day(s) or more -
Solid End Mill for Aluminum Machining (Regular Blade) (with Recess) AL-SEEZ3 Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 262.93- Days to Ship: 14 Day(s) -
Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) AL-SEES3-LS Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 296.55- Days to Ship: 9 Day(s) or more -
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 308.82- Days to Ship: 7 Day(s) or more -
Solid End Mill for Aluminum Machining (Long Blade) AL-SEEL2 Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 382.08- Days to Ship: 7 Day(s) or more -
Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length)
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 296.55- Days to Ship: 7 Day(s) or more -
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 114.19- Days to Ship: 10 Day(s) -
Carbide Center V End Mill KSV-2
KYOWA SEIKO
Tip angles 30°, 45°, 60°, 70°, 80°, 90°, and 120° with small sizes (φ0.5 to φ6) are available.
- Volume Discount
Standard Price: MYR 311.82- Days to Ship: 5 Day(s) or more -
Carbide Center V End Mill KSVA-2
KYOWA SEIKO
[Features]
A carbide end mill with 2 flutes suitable for general steel, stainless steel, and other workpieces.
The high cutting speed and high production efficiency lead to overall production cost reduction.
[Applications]
V-grooving, chamfering, side milling, etc. can be performed with this product alone.- Volume Discount
Standard Price: MYR 410.82- Days to Ship: 6 Day(s) or more -
Carbide Center V End Mill (with Rounded Tip) KSVRA-2
KYOWA SEIKO
[Features]
A carbide end mill with 2 flutes suitable for general steel, stainless steel, and other workpieces.
The R-shaped tip can be used for 3D machining and rounding.
The high cutting speed and high production efficiency lead to overall production cost reduction.Standard Price: MYR 501.21- Days to Ship: 6 Day(s) or more -
High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver
GUHRING
[Features]
· A single tool capable of all machining from drilling, ramping, and grooves to roughing and finishing.
· Furthermore, all of these processes can be done at high speed and high feed rate.Standard Price: MYR 304.66- Days to Ship: 6 Day(s) or more -
Carbide 4-Flute / 6-Flute High-Hardness End Mill 45° E166TX
7 LEADERS
[Features]
· High performance 4/6-flute 45° torsion end mill for machining high hardness materials with UMG carbide substrate.
· Enables high-efficiency machining in side cutting of high-hardness materials (up to HRC 70).
· Nanoparticle Multilayer Coating
· Suitable for machining high-hardness materials from HRC 45 to 70 due to high sheath harness and high initial oxidation temperature.
· Suitable for a wide range of work materials from general steel to high hardness steel.- Volume Discount
Standard Price: MYR 188.40- Days to Ship: 6 Day(s) or more -
Carbide 6-Flute End Mill for High Hardness 45°, E167TX
7 LEADERS
[Features]
·High-performance 6-flute 45° helix angle long end mill for processing high-hardness materials using UMG carbide material as the base material
·Highly efficient machining is possible by side cutting of high hardness material (Up to HRC70)
·Multi-layer coating of nanoparticles
·Due to high film hardness and oxidation resistance onset temperature, it is suitable for processing high hardness materials from HRC45 to 70
·Suitable for a wide range of work materials from general steel to high hardness steelStandard Price: MYR 377.46- Days to Ship: 6 Day(s) or more -
Zakkuri Mill (with Slim Shank) 3-Flute / OK Coat Premium SEE3ZTA
OKAZAKI SEIKO
[Features]
· Carbide end mills for plunge milling that enable non-step plunge cut feed, and further fluting as is.- Volume Discount
Standard Price: MYR 366.33- Days to Ship: 14 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | DIJET | DIJET | DIJET | DIJET | DIJET | DIJET | DIJET | DIJET | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | GUHRING | 7 LEADERS | 7 LEADERS | OKAZAKI SEIKO |
| Product Series | XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model | TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model | VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model) | VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model) | SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated | SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated | SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated | Solid End Mill for Aluminum Machining (Regular Blade) AL-SEES2 Type | Solid End Mill for Aluminum Machining (Regular Blade) (with Recess) AL-SEEZ3 Type | Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) AL-SEES3-LS Type | Solid End Mill for Aluminum Machining (Long Blade) AL-SEEL2 Type | High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver | Zakkuri Mill (with Slim Shank) 3-Flute / OK Coat Premium SEE3ZTA | ||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 14 Day(s) | 14 Day(s) | 6 Day(s) or more | 14 Day(s) | 14 Day(s) | 5 Day(s) or more | 14 Day(s) | 9 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 10 Day(s) | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 14 Day(s) |
| Specifications |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 1 ～ 12 | 1 ～ 12 | 1 ～ 20 | 3 ～ 16 | 1 ～ 20 | 2 ～ 20 | 2 ～ 20 | 3 ～ 16 | 3 ～ 12 | 1 ～ 12 | 5 ～ 22 | 2 ～ 12 | 2 ～ 20 | 3 ～ 25 | 3 ～ 20 | 5 ～ 20 | 3 ～ 25 | 3 ～ 20 | 3 ～ 32 | 6 ～ 30 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 1 ～ 20 | 3 ～ 25 | 3 ～ 22 | 6 ～ 22 | 3 ～ 25 | 3 ～ 20 | 2 ～ 12 | 0.5 ～ 6 | 1 ～ 6 | 1 ～ 6 | 4 ～ 20 | 3 ～ 12 | 6 ～ 12 | 18 |
| Blade length (ℓ)(mm) | 1.5 ～ 26 | 1.5 ～ 18 | 3 ～ 38 | 5 ～ 40 | 4 ～ 56 | 5 ～ 75 | 3.5 ～ 30 | 7 ～ 35 | 10.5 ～ 38 | 2 ～ 24 | 9 ～ 33 | 6 ～ 38 | 6 ～ 45 | 8 ～ 38 | 7 ～ 26 | 13 ～ 38 | 10 ～ 62 | 10 ～ 50 | 10 ～ 65 | 12 ～ 55 | 10 ～ 45 | 10 ～ 45 | 10 ～ 45 | 10 ～ 45 | 10 ～ 45 | 10 ～ 45 | 8 ～ 38 | 2.8 ～ 45 | 5 ～ 38 | 5 ～ 33 | 9 ～ 33 | 22 ～ 85 | 8 ～ 38 | 6.5 ～ 25 | 1 ～ 12 | 2 ～ 12 | 2 ～ 12 | 11 ～ 38 | 8 ～ 26 | 26 ～ 56 | - |
| Underneck length (ℓ1)(mm) | - | 14 ～ 68 | 18 ～ 73 | 22 ～ 78 | 26 ～ 92 | 30 ～ 112 | 30 ～ 140 | - | - | 17 ～ 50 | - | - | - | - | - | - | - | - | - | - | - | - | 15 ～ 80 | 15 ～ 80 | - | - | - | - | - | - | - | - | - | - | - | - | - | 18 ～ 52 | - | - | - |
| Shank diameter (d)(mm) | 4 ～ 12 | 6 ～ 12 | 4 ～ 20 | 6 ～ 16 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 16 | 6 ～ 12 | 4 ～ 12 | 4 ～ 20 | 6 ～ 12 | 6 ～ 20 | 6 ～ 25 | 6 ～ 20 | 6 ～ 20 | 3 ～ 25 | 6 ～ 20 | 6 ～ 32 | 6 ～ 25 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 3 ～ 20 | 6 ～ 25 | 4 ～ 20 | 4 ～ 20 | 6 ～ 25 | 6 ～ 20 | 4 ～ 12 | 3 ～ 6 | 4 ～ 6 | 4 ～ 6 | 6 ～ 20 | 6 ～ 12 | 6 ～ 12 | - |
| Number of flutes(sheet) | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 | 3 ～ 4 | 3 ～ 4 | 6 | 6 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 2 | 3 | 3 | 3 | 2 | 4 | 4 | 2 | 2 | 2 | - | 4 ～ 6 | 6 | - |
| Overall Length (L)(mm) | 45 ～ 100 | 60 ～ 100 | 60 ～ 110 | 60 ～ 110 | 60 ～ 130 | 60 ～ 150 | 80 ～ 200 | 60 ～ 105 | 60 ～ 100 | 40 ～ 80 | 80 ～ 200 | 60 ～ 100 | 50 ～ 100 | 57 ～ 104 | 54 ～ 92 | 50 ～ 110 | 50 ～ 140 | 50 ～ 115 | 50 ～ 160 | 80 ～ 200 | 45 ～ 105 | 45 ～ 105 | 70 ～ 800 | 70 ～ 800 | 45 ～ 105 | 45 ～ 105 | 60 ～ 125 | 40 ～ 115 | 55 ～ 130 | 70 ～ 200 | 80 ～ 200 | 65 ～ 160 | 60 ～ 125 | 40 ～ 75 | 40 ～ 60 | 45 ～ 60 | 50 ～ 60 | 57 ～ 104 | 50 ～ 75 | 80 ～ 110 | - |
| work material | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[◎] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] |
| Torsion Angle (θ) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | - | - | - | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Variable lead | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) |
| Machining Application | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove |
| Coating | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | DLC | DLC | For High Hardness (Silicon Group) | - | - | - | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | Non-Coated | DLC | Non-Coated | DLC | Non-Coated | TiAlN | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | TiAlN | Non-Coated | TiAlN | TiAlN | - | - | - | TiAlN |
| Blade tip shape | With Lead | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | With Lead | C plane | C plane | With Lead | Micro R | With Lead | - | - | - | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Micro R | Sharp Edge | Sharp Edge | Sharp Edge | - | - | - | Micro R | With Lead | With Lead | - |
| Type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | Square | Square | Square | Square | Square | Square | Square | Square | - | - | - | Square | High Helical | High Helical | High Helical |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.5～0.9
- 0.5
- 0.6
- 0.7
- 0.8
- 0.9
-
1～1.9
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.5
- 3
- 3.5
-
4～4.9
- 4
- 4.2
- 4.5
- 4.9
-
5～5.7
- 5
- 5.5
- 5.7
-
6～6.7
- 6
- 6.4
- 6.5
- 6.7
-
7～7.7
- 7
- 7.5
- 7.7
-
8～8.6
- 8
- 8.5
- 8.6
-
9～9.7
- 9
- 9.5
- 9.7
-
10
-
11～11.7
- 11
- 11.2
- 11.7
-
12
-
13～13.7
- 13
- 13.7
-
14
-
15～15.6
- 15
- 15.6
-
16
-
17
-
18
-
19～19.5
- 19
- 19.5
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
32
-
-
Blade length (ℓ)(mm)
-
1～1.6
- 1
- 1.2
- 1.4
- 1.5
- 1.6
-
2～2.8
- 2
- 2.25
- 2.3
- 2.5
- 2.8
-
3～3.8
- 3
- 3.5
- 3.8
-
4～4.5
- 4
- 4.4
- 4.5
-
5
-
6～6.5
- 6
- 6.5
-
7～7.5
- 7
- 7.5
-
8
-
9
-
10～10.5
- 10
- 10.5
-
11
-
12
-
12.5
-
13
-
14～14.5
- 14
- 14.5
-
15
-
16
-
17～17.5
- 17
- 17.5
-
18
-
19
-
20
-
21
-
22～22.5
- 22
- 22.5
-
23
-
24
-
25
-
26
-
27
-
28
-
30
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
40
-
42
-
45
-
46
-
47
-
48
-
50
-
52
-
53
-
55
-
56
-
60
-
62
-
64
-
65
-
70
-
75
-
80
-
85
-
100
[5-75/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
-
Blade tip shape
-
Type
- Square
- High Helical
Narrow search by specifying Manufacturer
-
- DIJET (8)
- OKAZAKI SEIKO (7)
- SANKO MFG (5)
- KYOWA SEIKO (3)
- 7 LEADERS (2)
- GUHRING (1)
- SANDVIK (0)
- OSG (0)
CAD
-
- 2D
- 3D
Related Categories to Multi-Function Square End Mills (Carbide)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy